All shipped products after 16 August 2010 are compatible

Position changing function

「Teaching Control」can be done by controlling the switch on the controller body. Direct Teach / Jog Teach can be performed without PC software and Teaching Boxed.

2 point / 3 point stop mode switching

「2 point / 3 point stop mode switching」 can be done by controlling the switch on the controller body.
Main changes can be performed without PC software and Teaching Boxed.

Low cost

The total cost for PMEC including all controller, power supply, acceleration・deceleration changing function, PC connecting cable, etc., is just 18,500 JPY. MEC PC software can be downloaded from IAI home page without any charges.

Easy control

First time users can perform settings without user's manual.
Acceleration・Deceleration can be changed with the controller attached knob.

Easy replacings from Air

Operatable with the exact same signals used to operate Air cylinders. The PLC programs currently in use can be used.

Ordered day shipping

All MEC and main ROBO Cylinders(models limited) ordered to our company before 12:00 noon, will be shipped on the day itself.

Pressing motion / Intermediate stop motion enabled

Pressing motion is enabled just as of Air cylinders.
Intermediate stops can be performed between original position and stroke end, by changing the configuration with MEC PC software.

Higher performance by using tools

2 point stops, 3 point stops and pressing motions are enabled through the usage of MEC PC software
and Touch Panel Teaching 「CON-PT」.
MEC PC software can be downloaded from the banner on the top right.