|
|
Super small size which can replace a small size Air cylinder
Realized a super small size of cross sectional size of □12mm, and its length of stroke+50mm. In this size, it can replace the small size Air cylinder which is used for short stroke movements, pressings, elevatings, etc.
|
|
|
Shows a high speed performance of maximum acceleration 1G, and maximum speed 300mm/s
The newly developed DC Brushless Motors are mounted, producing an efficient torque even in small size. The high speed performance of maximum acceleration 1G, and maximum speed 300mm/s cuts the cycle time shorter.
|
|
|
3 point positioning, speed・acceleration adjustment and pressing motion is enabled
The 3 point positioning, speed・acceleration adjustment and pressing motion can be easily configured, even though these were a difficult to be set for Air cylinders. The pressing motion can be done as just as of Air cylinders, and its pressing force can be adjusted.
| |
<RCD-RA1D Specification>
Heading |
Contents |
Drive system |
- |
Sliding Screw φ3mm Lead 2mm |
Stroke |
(mm) |
10/20/30 |
Rated Acceleration |
(G) |
1.0 |
Rated Speed (※1) |
(mm/s) |
300 |
Rated Thrust |
(N) |
4.2 |
Maximum Load Capacity (※2) |
(kg) |
Horizontal: 0.7 Vertical: 0.3 |
Repeated Positioning Precision (※3) |
(mm) |
±0.05 |
Encoder Resolution |
(P/R) |
400 |
Lost Motion (※3) |
(mm) |
Below 0.2 |
Static Rod Allowable Moment Load |
(Nm) |
0.02 |
Rod Non-Rotating Precision |
(degree) |
±3 |
Life Span |
(time) |
10 million round trips(shared for both horizontal/vertical) |
Ambient Temperature・Humidity |
- |
Temperature 0~40℃ Humidity 10~85%RH and below |
(※1) Based on strokes, there are certain cases where it does not reach the rated speed. (※2) In the case where outer equipped guides and free joints were used. (※3) Default value.
|