Compatible to off board tuning functions (standard function), which improves the actuator conveying ability

Off board tuning is a function where it raises the acceleration/deceleration whenever the load is small, and drops the acceleration/deceleration whenever the load is large, achieving an optimum motion configuration based on the load.
※ Please refer to this page for further details.
⇒Source catalogue(PDF/80KB)
※ Please refer to the page here for detailed data for each models.

Compatible to the main field networks (optional function)

A direct connection is enabled against DeviceNet, CC-Link(※1), PROFIBUS-DP, MECHATROLINK, CompoNet, EtherCAT, EtherNet/IP and PROFINET. The operation is now enabled through field networks, by specifying the direct coordination value.
(※1)CC-Link was changed from remote I/O to remote device

Vibration suppression control device (standard function)

Vibration suppressing control function, which suppresses the work attached to slider whenever the actuator slider moves, was added. Vibration convergence waiting time gets reduced, reducing the cycle time.
※ Please refer to this page for further details.
⇒Source catalogue(PDF/0.2MB)

Power suppression control device (Actuator: optional function/Controller: standard function)

Power suppression control device which allows the feedback of pressing force can be taken by having a dedicated load cell attached against RCS2-RA13R, enabling a high precision pressings, is added.
※ Please refer to this page for further details.⇒Source catalogue(PDF/0.4MB)

Number of time and traveling distance that actuator moved, notifies the maintenance timing (standard function)

Number of time and traveling distance that actuator moved will be calculated and recorded into the controller, and if it is exceeding the preset value, it will send the signal to outside. This notifies the timing for lubricating and regular maintenance.

The time alarm occurred can be preserved through calendar function (standard function)

Alarm analysis is made easier by having the alarm history shown by occurred time, through the addition of clock function.
(The maximum data preservation limit is 10 days)

PIO Connecting Specification
(※1)