New product information

PLC Feature-Installed Position Controller SCON-LC/LCG

Product information of the PLC feature-installed position controller
SCON-LC/LCG

Feature 1 Standard-installed with PLC feature

Ladder programs can be used to turn on or turn off the actuator operation and I/O (input and output) signal. For small-scaled device, SCON-LC/LCG alone will be just enough to control the device. For large-scaled device, dispersion control can be used to reduce the load of main PLC, by using SCON-LC/LCG in every procedures. Furthermore, it will be easier to simplify programs and to solve troubles whenever they occur.

Feature 2 Ladder software

● Feature of ladder software
Ladder software is the software used to control SCON-LC/LCG. This enables the users who previously used PLC for controlling purpose to use it without any extra efforts.
Moreover, the editting software "LC-LADDER" can create, monitor and debug ladder programs through easy steps.

1 Create program
Programs can be created using 27 types of basic commands (contact point command, output command, etc.) and 53 types of application commands (data comparison, arithmetic operation, logical operation, etc.).

2 Monitor
Program status can be checked through respective features while running the program.

3 Debug feature
Certain condition may be specified, and a program can be run under that condition, allowing the program to be checked to run under the specified condition.

4 Simulation
The program operation can be checked (simulated) on PC without operating the actual program using the controller.

*LC ladders can be downloaded here without charges.
http://www.iai-robot.co.th/download/pcsoft/lc-ladder/