The course for ROBO Cylinder installation was really easy to be understood. Actual contact with the machine has fixed my inner image, getting myself more used to them.
【Terumo Corporation　West Kofu Factory Technical Equipment Department　Mr. Kiyomizu Jyunnya】

I could thoroughly understand them, even though I did not have any knowledge for ROBO Cylinder. The image shown by the projector is the exact same as what it is in the reality, making it easy to understand.
【Rinnai Corporation　The Person In Charge】

It was a seminar, which was really easy to be understood, having demo models used. It is a highly interesting product. I would like to use it if I had the chance. I am looking forward for such time to come.
【Kolbenschmidt Corporation　Person In Charge Of Engineering Department, Administration and Registration Division　Mr. Midogochi Satoru】

It was a really a good idea, that we were allowed to move the demo model in reality. The change in configuration has an actual effect to the movement. This has made it easy to understand.
【Tanakatec Corporation　Designings　Mr. Fujihira Shintaro】

The example of the ROBO Cylinder usage was really useful as for our future reference. There were also ideas which could be used in our company. It was a great time for learning. The practice using the training kit was easy to understand, allowing me to learn the ROBO Cylinder basics. Thank you very much for the day.
【Vehicle Component Manufacturer　Production Engineering Department　The Person In Charge】

The explanation was done along the video, showing the scenes where the ROBO Cylinders were in actual use. This has given me ideas for situations I can consider installing ROBO Cylinders. The simplification that is brought by installing ROBO Cylinder, is well understood.
【Kashiwa Corporation　The Person In Charge】

We have never used ROBO Cylinders before, and now, we know much more about its characteristics and advantages compared to of Air cylinders. The model selection based on purpose of usage, and motor types and their differences in characteristics were explained down to its details. I found this really good. Isn’t ROBO Cylinders difficult to manage? That's what I've thought initially, but through the teachings, such preconception has resolved. I now feel, that I would like to attend the next seminar, too.
【Shihentec Corporation　Precise Machine Operational Department Technical Division　Mr. Fujisawa Kosuke】

There were functions I did not know, and I was able to understand the basic contents. I am looking forward for using these knowledge for the future equipment designings.
【Canon Electronics Inc.　The Person In Charge】

The course which used the actual machine was easily understood, and has deepened my understanding against ROBO Cylinder functions.
【Canon Electronics Inc.　Precise Machining Designs　Mr. Kouno Kennichirou】

I could understand well, the merit of using ROBO Cylinders. In future, I wish to use it if there were any valid improving plans.
【Kanazawa Murata Manufacturing Co., Ltd.　Manufacturing department 1 Production Division　Mr. Oota Gyouji】

I was told, "You can get a ROBO Cylinder!", and so I attended the course, but the contents, the cost savings and outstandingly low initial costs has opened my eyes, making me feel that there are lot of wastes in Air cylinder. I am doing LCA designings in production engineering. Few units are already in use, and I would do so too in future. I would like to inquire a few points, which I could not figure out. Please allow me to do so.
【Yamaha Motor Powered Products Co., Ltd　Factory Technology Division　Mr. Hayashi Youhei】

I have not touched any ROBO Cylinders before, and had a difficult image on its usage, but it was easy as a fact. If there were any next steps, I would be glad to participate it(such as controlling X and Y) It was great that I received a ROBO Cylinder. I would like to use this to teach in the company.
【Measuring Device Component Manufacturer　The Person In Charge】

Iron Constructed Attraction Facility Group Mr. Obara Nobuhiko I was able to gain a deep understanding,
since the ROBO Cylinder functions and examples of usage was presented really well, and it was done while having the actual product at my hand.
【Mitsubishi Heavy Industries, Ltd.　Kobe Shipbuilding Yard】

The talk concerning the energy efficiency comparison with Air cylinders, and the fact that the Rodless (Slider type) ROBO Cylinders are cheaper than I have thought, became a very good reference for me.
【Sumitomo Electric Industries, Ltd　The Person In Charge】

It was very easy to understand, making me know the electric cylinder's merits.
【GS Yuasa Writings　Technical Development Division　Mr. Kakunami Takayuki】

The ROBO Cylinder really impresses me. I have never used it before, and so the experiencing seminar has turned out to be a great help for me. In the future, as there are chances to do so, I am wishing to push more on the usage of the ROBO Cylinder. High expectation I have for the future improvements which includes everything from training kit to maintenance. Convertion to airless is the must item for energy conservations(including myself).
【Semiconductor Manufacturer　The Person In Charge】

I was amazed to see that the teach controls are so easy.
【Mamba Manufacturing Ltd.　Designings　Mr. Mamba Yoshikazu】

I was able to get practical information such as cost reductions and energy savings through the participation of the seminar. I personally wish to install them in the current equipments.
【Lock Manufacturer　The Person In Charge】

The contents were very easily understood. The adjustments were far easier than I've thought of.
【Nakagawa Electric Industrial Co., LTD. Designing Division　Mr. Masumi】

In my personal opinion, as an overall, the explanation was made very easy to be understood. I am satisfied having myself able to use the demo models, understanding the easy controlling procedures and its movements.
【Nihon Pisco Co., Ltd.　Manufacturing　Mr. Kobayashi Youtarou】

I've actually used the RCP2-SM type ROBO Cylinder. In comparison to Servo Motors, the setup(configuration) after fixing it into the device, was easier, giving me a solid sense of the easiness in its configuration.
【Furukawa Manufacturings Co., Ltd.　Electrical Engineering Division　Kimura Katsutoshi】

Conventionally, I had an image that unit price comparings have always taken the priority, leaving it expensive, or can't be used. But observing the dropped price, man-hours and maintainability, these proved me that the merits have overwhelmed the product cost. I would like to consider this to be fixed in, if there were any considerable property.
【Takaya Corporation Industrial Device Operational Department Engineering Division　Mr. Hiramatsu Hideaki】

In comparison to other company products, the controllings are extra-ordinarily easy to understand, and it’s has a potential to reduce the table top designing time. There are a lot of maintenance cost merits, including the equipment production cost, and it can be promoted to the majority of the departments in our company.
【Asahi Kogyosho Co., Ltd. Machinery Division Manager　Mr. Sakano Katsuhiko】

The seminar was made easy to understand, giving me a good experience. Thank you very much.
【Usui Kokusai Sangyo Kaisha, Ltd. Production Technology　Mr. Serizawa Shigeyuki】

The price and easiness to use, both of them gave me a shock for ERC series. I feel glad to find that Pendant RCB-J, which concentrates on the required function, can be teached through an easy control. If I was allowed to, I wish to see more small size line-ups in the ERC series. I wish to have the controller in even more smaller sizes.
【Victor Company of Japan Ltd.　The Person In Charge】

It was easy to understand, as it was a seminar using actual machines, allowing actual controls.
【Kyowakiden Industry Co., Ltd.　Solution Operational Department Engineering Division　Mr. Kawae Kouji】

I want to convert Air cylinders to these, pushing more on energy conservations. It will be more convenient if there were more variations(downsizing).
【Kohkoku Gum Ind. Co., Ltd.　Akabane factory　Production Technology Department　Mr. Kanou Takahiro】

There are good points such as assembling workers can change the position data (adjustings can be done without specialized workers for electrical software), and there are more positioning points compared to Air cylinders.
【Yamaguchi Machine Industry Co., Ltd. Engineering Department Director　Mr. Morie Yasunobu】

The explanation for the ROBO Cylinder functions・configuration procedures were easy to understand, highly rated from my personal point of view.
【Shutter Manufacturer　The Person In Charge】

Cost and function, both of them are great.
【Nikki Universal Ltd. Technology Development Group Engineer　Mr. Fukuji Atsushi】

One of the good points are that it has a low price(Easier to introduce). Highly versatile, having its functionality much higher than of Air cylinders. (Easier to select)
【Nihon Kagaku Sangyo Ltd.　The Person In Charge】

Currently considering the installation of this low cost energy saving device. Costs and environmental durabilities, and others are highly rated compared to of air devices.
【Motech, Inc　The Person In Charge】

The practice using the demo model became a good reference for us.
【Sanzen Seiko Ltd. Technical Department　Mr. Oono Haruhiko】

I am really glad to find the speed difficult to adjust on Air cylinders, to be configured by values now.
【General Industrial Machine Manufacturer　The Person In Charge】

It really impressed me that the ROBO Cylinder controls are so simple. To add in further, it is maintained low cost even though it has a lot of specifications with a variety of functions. I would like to consider its future installation.
【Confection Manufacturer　The Person In Charge】

Suitable to detect the floatings on press fittings and detecting those forgotten to put in.
【Resin Manufacturer　The Person In Charge】

I was able to understand very well, using the actual machine. I would like to make these a reference on controls, as we are planning to purchase the 2-Axis.
【Furukawa-Sky Aluminum Corp.　Technology Research Laboratory　Mr. Takahashi Kouichi】

There are good points such as easy to use as Air cylinders, and does not get affected by air pressures, unlike Air cylinders, and the positioning precision. Currently there are no plans for purchasings, but I would like to consider it for future plans as I am on machine designings.
【Moulding Machine Manufacturer　The Person In Charge】

Something interesting may be made by combining the pressing function and zone output signal functions.
【Izumi Electronics Ltd.　Mr. Saikai Masanori】

The difference with Air cylinders are very clear. Especially the multiple intermediate stops during a stroke, and the precise adjustment for the stopping position was clear. Such as the high precision of the stopping positions. This is an actuator I want to use for the parts where Air cylinders proved difficult to be used for.
【Vehicle Component Manufacturer　The Person In Charge】

These days, the morning chills required me for the speed controller adjustings, but by replacing it with ROBO Cylinders, the machine operation goes on a good condition, moving in a constant speed for all time.
【Textile Manufacturer　The Person In Charge】