Transfers the supplied workpieces to the conveyor for the next process at high speed.

Supplies/Removes the workpiece using SCARA Robots with splash-proof specification.

The process to apply sealant to the 6 specific points on the circuit board.

The process of sending conveyed item between conveyors with height differences.

The process of attaching the lid to the strawberry mochi box.

The process to remove burrs remaining inside the resin-molded lipstick cap.

A device to flip the pallets loaded on AGV.

Applied to spot welding process for parts of automobile frame.

Applied to semi-automated machines for press fir equipment for connectors and continuity inspection for automotive sensors.

Used as a device to bend in-vehicle speaker cover claws.

Used as a device to deburr machine components.

Used in the moulded component boxing device.

Used in a device which transfers crank shaft to next process.

Used in a device which cuts materials such as rubber materials by ejecting high pressured water.

Used in a process to weld clothes to resin components.

Used for positioning in welding.

Cleans the component through showering→steaming→drying tanks (processes).

Used for the movement of the hand.

Used in the sealing compound application device.

Used in character writing device for vehicle components.

Used when inspecting the appearance of automotive connectors using a camera.

Used for applying mold lubricant to the circuit boards.

Applied to the process of adhesive coating to light singing and lump cover.

Used in the process to apply silicon to printed circuit board, and press fit the cover.

Used in the process to inspect the switch for electronic equipments.

Used in the device which deburrs the outer periphery of a moulded cell phone main frame components.

Used in the printed circuit board splitting device.

Used in the automatic screw fastening device.

Picks & places the cap, and rivets the case by “pressing” motion

Used for transferring works between pallets.

Pick & Place unit which uses ROBO Cylinder in X-Axis and Y-Axis.

For the process of touching the touch panel with a pen to inspect the deviation between the touched position and the reacting position (touch inspection).

Applied to the process to supply pouch pack for food packaging to filling machine.

Applied to transfer equipment for bread on conveyer.

Used in the process where the syrups for breads are stuffed into box.

Used in the paste coating device for skewered dumplings.

Used in the laver cutting processes and cutting size adjustments.

Used in the device which spreads burning prevention oil to the oven plate using a roller.

3-Axis of Slider Type ROBO Cylinder and ROBO Gripper is adopted to the boxing process of the food products sent on conveyor.

ROBO Cylinder is used for the elevation of hands, and transportations between the conveyors.

Used for the positioning of chemical grouting position (test tube).

Used in the process of labeling bottles.

Applied to the inspection process for the hole size of heat exchanger.

Used in the device which detects an equipment gas leakage.

Used in the device which measures the height of the work.

Used in the process of supplying cases from the stocker to the conveyor.

Used in the process of removing incoming panels from the conveyor and transferring them to the tilt straightening machine.

Used to set the parts into their cases.

Applied to the printing process on plates.

Using for in/out device for aluminum parts to/from machining process at machining center.

In/out of works from/to coating and inspection device.

Applied to device to detaching screws of electrical appliance.

Stopping work flow and push out it.