Product feature
Attachment orientation
(Note) Photo above shows the motor reversing specification (Motor reversing on the left)(ML).
Main specification
| Heading | Contents | ||
|---|---|---|---|
| Speed reduction | M | L | |
| Lead | Ball screw lead (mm) | 4 | 4 |
| Pulley Deceleration Ratio | 1.00 | 1.50 | |
| Gripping Motion | Max. Gripping Force (N)(Both sides) | 1094 | 1641 |
| Gripping speed (mm/s) (per side) | 20 | 20 | |
| Approaching Motion | Max. Speed (mm/s)(Per side) | 175 | 117 |
| Min. Speed (mm/s)(Per side) | 10 | 10 | |
| Rated Acceleration/Deceleration (G)(Per side) | 0.3 | 0.3 | |
| Max. Acceleration/Deceleration (G)(Per side) | 1 | 1 | |
| Brake | Brake specification | Non-excitation electromagnetic brake | |
| Brake retention force (N) (both sides) | 785 | 1178 | |
| Stroke | Min. Stroke (mm)(Per side) | 105 | 105 |
| Max. Stroke (mm)(Per side) | 130 | 130 | |
| Heading | Contents |
|---|---|
| Drive system | Left/Right hand ball screw φ12mm, rolled C10 |
| Accuracy of Repeating Positioning. | ±0.02mm |
| Lost motion | - (Can't be indicated because this is a 2-point positioning function. ) |
| Backlash (Per side) | 0.03mm or less |
| Base | Dedicated aluminum extrusion material (equivalent to A6063SS-T5) treated with black alumite |
| Linear guide | Infinite linear circulation type |
| Allowable static moment value | Ma ： 79.7 N･m |
| Mb ： 114.0 N･m | |
| Mc ： 157.0 N･m | |
| Vertical Payload (Note 6) | 2330N |
| Ambient operating temperature and humidity | 0 - 40℃, RH 85% and below (no condensation) |
| Protection grade | IP20 |
| Vibration resistant/Shock resistant | 4.9m/s2 |
| Compatible to overseas standards | CE mark, RoHS compliant |
| Motor type | Pulse motor (□56) (power capacity: Max. 4.2A) |
| Encoder type | Incremental / Battery-less absolute |
| Encoder pulse No. | 800 pulse/rev |
| Delivery | Written in [Reference for delivery] section of the homepage |
(Note 6) If the product is used with a load exceeding the above value, it may shorten its life or cause damage.
Direction of the Moment for Slider Type
Adaptive controller
(Note) EC series has their controller built-in themselves. See page 2 769 for details of the built-in controller.
Oversea specification
Important notes on selection
 | (1) The maximum opening/closing speed of the "Main specification" indicates the operating speed of one side. The relative operating speed will be the double. (2) The maximum gripping force of the "Main specification" is the total value of the gripping force of both fingers when the gripping point distance and the overhang distance is 0. For the actual work mass that can be transported, refer to "Checking the Gripping Point Distance". (3) Be sure to use push-motion operation to grip the work. (4) The duty ratio must be limited according to the ambient temperature of use. Refer to page 1-326 for further details. (5) Requires extra care required depending on the mounting posture. Refer to page 1-307 for further details. (6) This model does not have a self-lock mechanism. If you need a model with brake mechanism, please select the brake option. The automatic servo-off function can maintain the gripping force after the power is turned off until the brake is applied. (However, this does not guarantee that the workpiece held will not drop. ) (7) "Disable" is the only available option for the controller's "power saving settings". |
Dimension drawing
ST： Stroke
M.E.： Mechanical end
S.E.： Stroke end
※1 At homing, both sliders will move to M.E., so be careful of interference with surrounding objects.
*2 Both sliders move in opposite directions simultaneously.
(Note) Home position is at the open side as standard. If you want the origin to be on the closing side, please specify the option (model: NM).
(Note) Nut holders (6 pieces) are included with the square nut.
(Note) Diagram below shows the motor left-reversing specification (ML).
Dimension by stroke length
| Stroke | 210 | 260 |
|---|---|---|
| L | 565.5 | 615.5 |
| A | 542.5 | 592.5 |
| B | 495 | 545 |
| J | 250 | 275 |
| K | 200 | 225 |
Mass by stroke length
| Stroke | 210 | 260 | ||
|---|---|---|---|---|
| Mass (kg) | GRST7M | Without brake | 6.5 | 6.7 |
| With brake | 6.7 | 6.9 | ||
| GRST7L | Without brake | 6.5 | 6.7 | |
| With brake | 6.7 | 6.9 | ||
Checking the Gripping Point Distance
When using, make sure that the distance (L, H) from the finger (claw) mounting surface to the gripping point is within the range of the graph.
(Note) If the limit range is exceeded, an excessive moment will be applied to the finger sliding part and the internal mechanism, which may adversely affect the service life.
Gripping Force
■Correlation Diagram of Gripping Force and Current Limit Value
(Note) This is the total value of both fingers when the grip point distance (L, H) is 0.
(Note) Values indicated are for reference only. There is a variation of approximately 0-60%. The possibility of variation increases especially when the current limit value outside the recommended area (coloured area in the graph) is set.
(Note) The speed when gripping (pushing) is 20mm/s. If the approaching speed is 20mm/s or less, gripping will be performed at the approaching speed.
■Reference for Gripping Point Distance and Gripping Force
(Note) The gripping force is based on the extended position when the maximum gripping force is defined as 100%. Results may vary depending on the rigidity of the finger attachment used.