EC-RR7□AHR
EC-DRR7□AHR

(Note) Photo above shows the motor reversing specification (Motor reversing on the left)(ML).

Main specification

HeadingContents
LeadBall screw lead (mm)241684
HorizontalLoad capacityMax. load capacity (kg) (Power saving disabled)20506080
Max. load capacity (kg) (Power saving enabled)18405055
Speed/ Acceleration/DecelerationMaximum speed (mm/s)860640320150
Minimum speed (mm/s)3020105
Rated acceleration/deceleration (G)0.30.30.30.3
Maximum acceleration/deceleration (G)1111
VerticalLoad capacityMax. load capacity (kg) (Power saving disabled)381828
Max. load capacity (kg) (Power saving enabled)3517.526
Speed/ Acceleration/DecelerationMaximum speed (mm/s)640560280140
Minimum speed (mm/s)3020105
Rated acceleration/deceleration (G)0.30.30.30.3
Maximum acceleration/deceleration (G)0.50.50.50.5
Pressing motionMax. pressing thrust (N)1822735471094
Max. pressing speed (mm/s)20202020
BrakeBrake specificationNon-excitation electromagnetic brake
Brake retention force (kgf)381828
StrokeMinimum stroke (mm)50505050
Maximum stroke (mm)500500500500
Stroke pitch (mm)50505050

HeadingContents
Drive systemBall screw φ12mm Rolled C10
Accuracy of Repeating Positioning.±0.05mm
Lost motion- (Can't be shown as this is a 2-point positioning function)
Linear guideInfinite linear circulation type
Rodφ30mm Material: Aluminum Hard alumite plated
Rod non-rotation accuracy (Note 8)
Ambient operating temperature and humidity0 - 40℃, RH 85% and below (no condensation)
Protection gradeIP20
Vibration resistant/Shock resistant4.9m/s2
Compatible to overseas standardsCE mark, RoHS compliant
Motor typePulse motor
Encoder typeIncremental / Battery-less absolute
Encoder pulse number800 pulse/rev
DeliveryWritten in [Reference for delivery] section of the homepage

(Note 8) Indicates the displacement angle in the rod rotation direction when there is no load.

Load capacity by speed and acceleration table

Power saving setting disabled The unit of load capacity is kg. Empty column refers to inoperable motion.

OrientationHorizontalVertical
SpeedAcceleration (G)
(mm/s)0.30.50.710.30.5
02018151233
2002018151233
400201412833
420171210633
600146542.52
6405321.521
800511
8602

OrientationHorizontalVertical
SpeedAcceleration (G)
(mm/s)0.30.50.710.30.5
05040353088
1405040353088
2805035252077
4202518101043
56075210.50.5
6402.5

OrientationHorizontalVertical
SpeedAcceleration (G)
(mm/s)0.30.50.710.30.5
0605045401818
70605045401818
140605045401612
21060403126109
28025108632.5
3205

OrientationHorizontalVertical
SpeedAcceleration (G)
(mm/s)0.30.50.710.30.5
0807065602828
35807065602828
70807065602828
105806050401818
140401510553
15020

Power saving setting enabled The unit of load capacity is kg. Empty column refers to inoperable motion.

OrientationHorizontalVertical
SpeedAcceleration (G)
(mm/s)0.30.70.3
0189.53
200189.53
4201051.5
6301

OrientationHorizontalVertical
SpeedAcceleration (G)
(mm/s)0.30.70.3
040255
14040255
28018122
4201.51

OrientationHorizontalVertical
SpeedAcceleration (G)
(mm/s)0.30.70.3
0503017.5
70503017.5
14050307
2101471

OrientationHorizontalVertical
SpeedAcceleration (G)
(mm/s)0.30.70.3
0555026
35555026
70555013
10530152

Stroke and maximum speed

(Measured in mm/s)

Lead
(mm)
Energy saving
setting
50 - 500
(Every 50mm)
24Invalid860<640>
Valid630<420>
16Invalid640<560>
Valid420<280>
8Invalid320<280>
Valid210
4Invalid150<140>
Valid105

(Note) The value within < > are applicable for those installed vertically.

Correlation diagram of pressing force and current limiting value

Flexible volume (reference value)

Adaptive controller

(Note) EC series has their controller built-in themselves. See page 285 for further details on the built-in controller.

Important notes on selection

(1) The value shown for load capacity in "Main specification" refers to the maximum value. When enabling the power saving setting, the main specifications will change. For details, refer to "Payload table by speed/acceleration".
(2) Radial cylinder has a built-in guide. See page 377 for details on the radial load acting on the rod.
(3) Horizontal load capacity shown assumes an operation running with an external guide.
(4) Refer "Correlation of pressing force and current limit value" for further information on pressing motion. Pressing force shown are their standard value.
(5) It is necessary to limit the duty depending on the ambient temperature used. Refer to page 389 for further details.
(6) Safety measures may be required depending on the attachment orientation. Refer to page 379 for further details.

Return to the page top

Oversea specification

Feature

Dimension drawing

EC-RR7□AHR

ST: Stroke

M.E.: Mechanical end

S.E.: Stroke end

(Note) The rod moves to the M.E. upon returning to origin, so please take precaution that it may not interfere with anything while the returning process is running.

(Note) Diagram below shows the motor left-reversing specification (ML).

Dimension by stroke length

Stroke50100150200250300350400450500
L284334384434484534584634684734
A261311361411461511561611661711
B208.5258.5308.5358.5408.5458.5508.5558.5608.5658.5
C500500500500500
D1223344556
E6688101012121414
J150200250300350400450500550600

Mass by stroke length

Stroke50100150200250300350400450500
Mass
(kg)
Brake present4.655.35.666.36.677.37.6
Brake absent5.15.55.86.16.56.87.17.57.88.1

EC-DRR7□AHR

ST: Stroke

M.E.: Mechanical end

S.E.: Stroke end

(Note) The rod moves to the M.E. upon returning to origin, so please take precaution that it may not interfere with anything while the returning process is running.

(Note) Diagram below shows the motor left-reversing specification (ML).

Dimension by stroke length

Stroke50100150200250300350400450500
L284334384434484534584634684734
A261311361411461511561611661711
B208.5258.5308.5358.5408.5458.5508.5558.5608.5658.5
C500500500500500
D1223344556
E6688101012121414
J150200250300350400450500550600

Mass by stroke length

Stroke50100150200250300350400450500
Mass
(kg)
Brake present4.85.15.55.86.16.56.87.27.57.9
Brake absent5.45.76.16.46.77.17.47.88.18.5