Product feature

Attachment orientation

(Note) Photo above shows the motor reversing specification (Motor reversing on the left)(ML).

Dimension drawing
Important notes on selection
Adaptive controller

Main specification

Specification 1

Heading			Contents
Lead		Ball screw lead (mm)	30	20	10	5
Horizontal	Load capacity	Maximum load capacity (kg)	20	35	70	80
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	1000	900	450	225
		Minimum speed (mm/s)	38	25	13	7
		Rated acceleration/deceleration (G)	0.3	0.3	0.3	0.3
		Maximum acceleration/deceleration (G)	1	1	0.5	0.3
Vertical	Load capacity	Maximum load capacity (kg)	2	4	25	55
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	850	650	400	200
		Minimum speed (mm/s)	38	25	13	7
		Rated acceleration/deceleration (G)	0.3	0.3	0.3	0.3
		Maximum acceleration/deceleration (G)	0.5	0.5	0.5	0.3
Pressing motion		Max. pressing thrust (N)	78	103	235	470
Pressing motion		Max. pressing speed (mm/s)	38	25	20	20
Brake		Brake specification	Non-excitation electromagnetic brake
Brake		Brake retention force (kgf)	2	4	25	55
Stroke		Minimum stroke (mm)	50	50	50	50
		Maximum stroke (mm)	600	600	600	600
		Stroke pitch (mm)	50	50	50	50

Specification 2

Heading	Contents
Drive system	Ball screw φ16mm, rolled C10
Accuracy of Repeating Positioning.	Lead 5/10: ±0.02mm, lead 20: ±0.03mm, lead 30: ±0.04mm
Lost motion	- (Can't be indicated because this is a 2-point positioning function. )
Base	Dedicated aluminum extrusion material (equivalent to A6063SS-T6) treated with black alumite
Linear guide	Infinite linear circulation type
Allowable static moment value	Ma： 173 N･m
	Mb： 173 N･m
	Mc： 271N･m
Dynamic allowable moment (Note 9)	Ma： 61 N･m
	Mb： 61 N･m
	Mc： 116N･m
Ambient operating temperature and humidity	0 - 40℃, RH 85% and below (no condensation)
Protection grade	IP20
Vibration resistant/Shock resistant	4.9m/s²
Compatible to overseas standards	CE mark, RoHS compliant
Motor type	Pulse motor (□56SP) (power capacity: Max. 6A)
Encoder type	Incremental / Battery-less absolute
Encoder pulse No.	800 pulse/rev
Delivery	Written in [Reference for delivery] section of the homepage

(Note 9) Based on standard rated life of 5,000km. Life time travelling distance differs based on operating condition and attached condition. Refer page 1-276 for the operating life.

Slider type moment direction

Load capacity by speed and acceleration table

The base unit for load capacity is kilogram (kg). Empty column refers to inoperable motion.

Lead 30

Orientation	Horizontal				Vertical
Speed (mm/s)	Acceleration (G)
Speed (mm/s)	0.3	0.5	0.7	1	0.3	0.5
0	20	16	13	12	2	2
200	20	16	13	12	2	2
400	20	13	12	11	1	1
650	14	10	9	8	1	1
850	9	6	4	2	1	1
1000		3	2	1

Lead 20

Orientation	Horizontal				Vertical
Speed	Acceleration (G)
(mm/s)	0.3	0.5	0.7	1	0.3	0.5
0	35	25	24	24	4	4
200	35	25	24	24	4	4
300	35	25	24	16	4	4
400	35	22	18	12	1	1
650	18	9	4	3	1	1
800	10	3	1
900	7	1

Lead 10

Orientation	Horizontal		Vertical
Speed	Acceleration (G)
(mm/s)	0.3	0.5	0.3	0.5
0	70	70	25	25
100	70	70	25	25
155	60	50	14	14
225	60	50	14	14
300	45	30	7	7
400	15	9	2	1
450	11	2

Lead 5

Orientation	Horizontal	Vertical
Speed (mm/s)	Acceleration (G)
Speed (mm/s)	0.3	0.3
0	80	55
50	80	55
75	80	30
135	80	18
175	70	11
200	40	3
225	10

Stroke and maximum speed

(Measured in mm/s)

Lead (mm)	50 - 350 (per 50mm)	400 (mm)	450 (mm)	500 (mm)	550 (mm)	600 (mm)
30	1000＜850＞		940＜850＞	770	645	550
20	900＜650＞	790＜650＞	640	520	440	370
10	450＜400＞	335	280	225	185	180
5	225＜200＞	165	150	110	90	90

(Note) < > is applicable when operated vertically.

Correlation diagram of pressing force and current limiting value

Adaptive controller

(Note) EC series has their controller built-in themselves. See page 2 769 for details of the built-in controller.

Oversea specification

Important notes on selection

(1) Maximum speed drops when the stroke length increase, preventing it from reaching the critical revolution value of the ball screws. Use the "Stroke and Max.speed" to check the maximum speed at the stroke you desire.
(2) The value shown for load capacity in "Main specification" refers to the maximum value. Please refer to "Load capacity by speed and acceleration table" for further information.
(3) Refer "Correlation of pressing force and current limit value" if you may need to operate pressing motion. Pressing force shown are their standard value. Refer page 1- 315 for important points to be taken note of.
(4) The duty ratio must be limited according to the ambient temperature of use. Refer to page 1-326 for further details.
(5) Requires extra care required depending on the mounting posture. Refer to page 1-307 for further details.
(6) The approximate overhang load length is 400mm or less in Ma, Mb, and Mc directions (800mm or less for double slider types). Please refer to page 2-109 for the overhang load length.
(7) The center of gravity of the attached object should be less than 1/2 of the overhang distance. Even if the overhang distance and load moment are within the allowable values, if abnormal vibration or noise occurs during operation, loosen the operating conditions before use.
(8) Please refer to page 1-293 for the order number and precautions for the double slider type.
(9) When connecting the RCON-EC connection specification (ACR) to the EC connection unit (RCON-EC-4), the number of connections that can be made is limited. Refer to page 2-798 for further details.

Return to the page top

Dimension drawing

ST： Stroke

M.E.： Mechanical end

S.E.： Stroke end

(Note) Please be careful while returning to the home position, for there is a chance of collision while having the slider returning to the M.E. position.

(Note) Please pay attention to the length of the mounting bolt. When using the mounting screws on the back of the base, if the bolts are too long, they may interfere with internal parts and cause abnormal sliding or damage to parts.

(Note) When fixing the actuator using the through hole in the base, the side cover and stainless steel sheet must be removed first.

(Note) If the stroke is 50/100, there are through holes that cannot be used. Attach the main unit using the screw holes on the bottom of the base.

(Note) The figure below shows a motor with left-reversing specification (ML).

Dimension by stroke length

Stroke	50	100	150	200	250	300	350	400	450	500	550	600
L	322	372	422	472	522	572	622	672	722	772	822	872
A	293.5	343.5	393.5	443.5	493.5	543.5	593.5	643.5	693.5	743.5	793.5	843.5
B	230	280	330	380	430	480	530	580	630	680	730	780
D	1	2	2	3	3	4	4	5	5	6	6	7
E	4	6	6	8	8	10	10	12	12	14	14	16
G	1	2	2	3	3	4	4	5	5	6	6	7
H	4	6	6	8	8	10	10	12	12	14	14	16
J	0	0	80	180	180	280	280	380	380	480	480	580
K	0	100	100	200	200	300	300	400	400	500	500	600
M	2	3	3	3	3	3	3	3	3	3	3	3

Mass by stroke length

Stroke		50	100	150	200	250	300	350	400	450	500	550	600
Mass (kg)	Without brake	4.9	5.2	5.5	5.8	6.1	6.4	6.7	7.0	7.3	7.6	7.9	8.2
Mass (kg)	With brake	5.7	6.0	6.3	6.6	6.9	7.2	7.5	7.8	8.1	8.4	8.7	9.0

Main specification (double slider type)

Specification 1

Heading			Contents
Lead		Ball screw lead (mm)	20	10	5
Horizontal	Load capacity	Maximum load capacity (kg)	35	63	73
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	400	400	200
		Minimum speed (mm/s)	25	13	7
		Rated acceleration/deceleration (G)	0.3	0.3	0.3
		Maximum acceleration/deceleration (G)	0.5	0.5	0.3
Vertical	Load capacity	Maximum load capacity (kg)	－	18	48
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	－	185	175
		Minimum speed (mm/s)	－	13	7
		Rated acceleration/deceleration (G)	－	0.3	0.3
		Maximum acceleration/deceleration (G)	－	0.5	0.3
Pressing motion		Max. pressing thrust (N)	103	235	470
Pressing motion		Max. pressing speed (mm/s)	25	20	20
Brake		Brake specification	Non-excitation electromagnetic brake
Brake		Brake retention force (kgf)	4	25	55
Stroke		Min. nominal stroke (mm)	250	250	250
		Min. effective stroke (mm)	50	50	50
		Max. nominal stroke (mm)	600	600	600
		Max. effective stroke (mm)	400	400	400
		Stroke pitch (mm)	50	50	50

(Note) Nominal stroke: Stroke indicated in the model

　Effective stroke: Actual stroke during operation

(Note) Lead 20 can't be installed vertically.

Specification 2

Heading	Contents
Drive system	Ball screw φ16mm, rolled C10
Accuracy of Repeating Positioning.	Lead 5/10: ±0.02mm, lead 20: ±0.03mm
Lost motion	- (Can't be indicated because this is a 2-point positioning function. )
Base	Dedicated aluminum extrusion material (equivalent to A6063SS-T6) treated with black alumite
Linear guide	Infinite linear circulation type
Allowable static moment value	Ma： 1560 N･m
	Mb： 1560 N･m
	Mc： 542 N･m
Dynamic allowable moment (Note 10)	Ma： 449 N･m
	Mb： 449 N･m
	Mc： 188 N･m
Ambient operating temperature and humidity	0 - 40℃, RH 85% and below (no condensation)
Protection grade	IP20
Vibration resistant/Shock resistant	4.9m/s²
Compatible to overseas standards	CE mark, RoHS compliant
Motor type	Pulse motor (□56SP) (power capacity: Max. 6A)
Encoder type	Incremental / Battery-less absolute
Encoder pulse No.	800 pulse/rev
Delivery	Written in [Reference for delivery] section of the homepage

(Note 10) Based on standard rated life of 5,000km. Life time travelling distance differs based on operating condition and attached condition. Refer page 1-276 for the operating life.