ICSB2-BP□H
ICSPB2-BP□H

Product feature

Maximum speed by stroke

(Measured in mm/s)


100 - 700800～900950～10001050～11001150～12001250～1300
X axis25002260184015701360
Y axis2400－－－－－

Payload by acceleration

The unit in the table is kg.


Y-axis stroke
100150200250300350400450500550600650700
Acceleration (Note 4)0.236.635.835.034.233.532.731.931.130.329.528.828.027.3
0.336.635.835.034.233.532.731.931.130.329.528.828.027.3
0.423.122.321.520.720.019.218.417.616.816.015.314.513.8
0.515.014.213.412.611.911.110.39.58.77.97.26.45.7
0.69.68.88.07.26.55.75.04.13.32.51.81.0－
0.76.05.24.43.62.92.11.40.5－－－－－
0.82.41.60.8－－－－－－－－－－
0.9－－－－－－－－－－－－－
1－－－－－－－－－－－－－
1.1－－－－－－－－－－－－－
1.2－－－－－－－－－－－－－

(Note 4) The payload shown is when the X-axis and Y-axis are operated at the acceleration shown in the table.

Adaptive controller

Please refer to each controller page. (Page 8-8) Please note that the controller is sold separately.

Oversea specification

Important notes on selection

(1) Value shown in stroke column of the model item is indicated in cm (centimeter) in the model.
(2) The cable length is the length from the X-axis connector box to the controller (from the X-axis actuator cable for the cable track type). The standard length is 3m or 5m, but other lengths are also available in meters. Available lengths are up to 20m.
(3) Note that the maximum speed will decrease as the stroke increases.
(4) The rated acceleration is 0.3G on the X axis and 0.4G on the Y axis. If the acceleration is increased, the payload will decrease.
(5) For the types with self-standing cables, the X-axis strokes indicated in the model item will have an upper limit of 1000 mm.
(6) The values ​​in 【　】 are for high precision specifications.

Return to the page top

Dimension drawing

ICSB2 【ICSPB2】-BP□H-SC (Self-standing cable type)

(Note) The combined position of the drawing is the home position. To change the home, specify the option NM. Please note that return adjustment is required when changing the home after delivery.

X-axis stroke1001502002503003504004505005506006507007508008509009501000
A0011112222333344445
B245295145195245295145195245295145195245295145195245295145
C4466668888101010101212121214
D70120170220270320370420470520570620670720770820870920970
N450450500500550550600600650650700700700750750800800850850

ICSB2 【ICSPB2】-BP□H-CT (Cable track type)

*1 There is a possibility that the cable track will bulge upwards by up to 25mm.

(Note) The combined position of the drawing is the home position. To change the home, specify the option NM. Please note that return adjustment is required when changing the home after delivery.

X-axis stroke1001502002503003504004505005506006507007508008509009501000105011001150120012501300
A0011112222333344445555666
B245295145195245295145195245295145195245295145195245295145195245295145195245
C4466668888101010101212121214141414161616
D70120170220270320370420470520570620670720770820870920970102010701120117012201270
N175200225250275300325350375400425450475500525550575600625650675700725750775

Common specifications

Drive systemBall screw Rolled C10 【Rolled C5 equivalent】
Accuracy of Repeating Positioning.±0.01mm【±0.005mm】
Lost motion0.05mm or less 【0.02mm or less】
GuideIntegrated base type
BaseMaterial: White alumite treated aluminum
X-axis motor output/lead750W/50mm
Y-axis motor output/lead400W/40mm

XY Configuration Direction

Model content

XY configuration
direction (Note 1)		Model
1ICSB2【ICSPB2】-BP1H-①-②③-④⑤-T□-⑥-⑦-⑧
2ICSB2【ICSPB2】-BP2H-①-②③-④⑤-T□-⑥-⑦-⑧
3ICSB2【ICSPB2】-BP3H-①-②③-④⑤-T□-⑥-⑦-⑧
4ICSB2【ICSPB2】-BP4H-①-②③-④⑤-T□-⑥-⑦-⑧

(Note 1) Please refer to the diagram below for the XY configuration direction. Refer to the table below for the contents of above model numbers ① to ⑧.

Symbol in model code

NumberContentsNotation
①Encoder typeWA： Battery-less absolute
②X-axis stroke (Note 2)10： 100mm
　　-
130： 1300mm
③X-axis
option		See option table
④Y-axis stroke10： 100mm
　　-
70： 700mm
⑤Y-axis
option		See option table
⑥Cable Length3L： 3m
5L： 5m
□L： □m
⑦Y-axis cable wiringSC： Self-standing cable
CT: Cable track
⑧Z-axis cable wiring
(option) (Note 3)		CT： Cable track

(Note 2) For the self-standing cable type, the upper limit of the X-axis stroke will be 1000mm.

(Note 3) Fill in the Z-axis cable wiring column of the model item only when necessary. This can be selected only when the Y-axis cable wiring is "CT". Please refer to 5-577 for external dimensions.

Component axis

Axis nameModelReference page
X axisISB【ISPB】-WXM-①-750-50-②-T□-⑨-③3-469
Y axisISB【ISPB】-LXM-①-400-40-④-T□-⑨-⑤3-441

(Note) For the above model numbers ① to ⑤, refer to the symbol in model code table above. The stroke is indicated in mm (millimeter).

(Note) ⑨ of the above model indicates the cable exit direction. Please refer to page 5-575 for the direction of the exit.