(Note) The photo shows the configuration direction "1" with cable track for all axes.
Refer to page 4-83 for other configuration direction.
Spec
| Heading | X axis | Y axis | Z axis | |
|---|---|---|---|---|
| Component axis | RCP6-SA7C | RCP6-SA6C | RCP6-TA4C | |
| Stroke | 50 - 800mm (Every 50mm) | 50 - 200mm (Every 50mm) | 50 - 100mm (Every 25mm) | |
| Maximum speed (Note 3) | HHM | 420mm/s | 560mm/s | 260mm/s |
| HHH | 350mm/s | |||
| Motor size | 56□ pulse motor | 42□ pulse motor | 35□ pulse motor | |
| Ball screw lead | HHM | 16mm | 12mm | 5mm |
| HHH | 10mm | |||
| Drive system | Ball screw φ12mm Rolled C10 | Ball screw φ10mm Rolled C10 | Ball screw φ8mm Rolled C10 | |
| Accuracy of Repeating Positioning. | ±0.01mm | |||
| Base material | Aluminium | |||
| Ambient operating temperature and humidity | 0 - 40℃, 85% RH or less (non-condensing) | |||
(Note 3) The maximum speed may not be reached if the travel distance is short or the acceleration is low.
The maximum speed may change depending on the stroke.
Refer to the maximum speed table by stroke on page 4-613 for further details.
Payload by acceleration
The unit in the table is kg.
HHM type: X high speed/Y high speed/Z medium speed
| Y-axis stroke (mm) Acceleration/Deceleration (G) | 50 - 200 (Every 50mm) |
|---|---|
| 0.1 | 2 |
| 0.3 | 2 |
| 0.5 | 1.5 |
HHH type: X high speed/Y high speed/Z high speed
| Y-axis stroke (mm) Acceleration/Deceleration (G) | 50 - 200 (Every 50mm) |
|---|---|
| 0.1 | 1 |
| 0.3 | 1 |
| 0.5 | 1 |
Adaptive controller
The controller is sold separately. Please refer to each controller page.
| Type | Component axis | Connectable controller | Reference page |
|---|---|---|---|
| PM1 | X-axis: SA7C Y-axis: SA6C Z-axis: TA4C | PCON-CB/CGB | 7-137 |
| PCON-CYB/PLB/POB | 7-153 | ||
| MCON-C/CG | 7-117 | ||
| MCON-LC/LCG | |||
| MSEL | 7-257 | ||
| PM2 | RCON-PC | 7-23 |
(Note) It can operate with high output setting specifications. When using by connecting to the MCON controller, it is necessary to select "High output setting specifications".
Please contact us when using with high output disabled setting.
Oversea specification
Important notes on selection
 | (1) Basically, the product is assembled before shipping. Please contact our sales staff if you would like to have the product shipped without assembling. (2) If the stroke is 75 mm and the stroke column of the model item is shows a value such as "7.5", omit 0.5 and write "7". (3) "Payload by acceleration" is for the same acceleration/deceleration for X-axis, Y-axis and Z-axis. If significant vibration occurs, reduce the speed/acceleration/deceleration accordingly. |
Dimension drawing
*1 The cable track may swell and turning slightly larger than the stated dimensions.
(Note) The configuration position in the figure is home.
(Note) The figure is for the case where the 1st wiring, 2nd wiring and 3rd wiring are equipped with a cable track.
(Note) Refer to page 4-611 for details on the cable track and cable track moving end bracket.
(Note) Please fix the X-axis cable track guide rail to the surface on which the X-axis will be installed.
When the foot plate option is selected, it will be shipped fixed to the foot plate. (Refer to page 4-608)
Fix the moving end of the Z-axis cable track to the plate, etc., that you have attached to the Z-axis slider.
Dimension by stroke length
| X: Stroke | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 188 | 238 | 288 | 338 | 388 | 438 | 488 | 538 | 588 | 638 | 688 | 738 | 788 | 838 | 888 | 938 |
| B | 0 | 1 | 1 | 2 | 2 | 3 | 3 | 4 | 4 | 5 | 5 | 6 | 6 | 7 | 7 | 8 |
| C | 4 | 6 | 6 | 8 | 8 | 10 | 10 | 12 | 12 | 14 | 14 | 16 | 16 | 18 | 18 | 20 |
| D | 0 | 0 | 100 | 200 | 200 | 300 | 300 | 400 | 400 | 500 | 500 | 600 | 600 | 700 | 700 | 800 |
| E | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| F | 0 | 85 | 85 | 185 | 185 | 285 | 285 | 385 | 385 | 485 | 485 | 585 | 585 | 685 | 685 | 785 |
| G | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| H | 188 | 213 | 238 | 263 | 288 | 313 | 338 | 363 | 388 | 413 | 438 | 463 | 488 | 513 | 538 | 563 |
| J | 16.5 | 16.5 | 14 | 16.5 | 16.5 | 16.5 | 14 | 16.5 | 14 | 16 | 15 | 66.5 | 44 | 56.5 | 69 | 16 |
| K | 1 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 2 | 2 | 2 | 3 |
| M | 155 | 180 | 210 | 115 | 127.5 | 140 | 155 | 165 | 180 | 127 | 136 | 110 | 200 | 200 | 200 | 177 |
| N | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 3 | 3 | 3 | 4 |
Dimension by stroke length
| Cable track size | CT | CTM | CTL | CTXL |
|---|---|---|---|---|
| Q1 | 283 | 296 | 309 | 326 |
| Q2 | 84.5 | 97.5 | 110.5 | 127.5 |
| S1 | 82 | 94 | － | － |
| S2 | 46 | 52.5 | － | － |
(Note) The dimensions of Q1, Q2, S1 and S2 change depending on the size of the cable track.
Dimension by stroke length
| Z: Stroke | 50 | 75 | 100 |
|---|---|---|---|
| R | 1 | 2 | 2 |
| T | 4 | 6 | 6 |
| V | 117 | 142 | 167 |