ISWA-M-100
ISPWA-M-100

Product feature

Attachment orientation

Dimension drawing
Important notes on selection
Adaptive controller

Main specification

Specification 1

Heading			Contents
Lead		Ball screw lead (mm)	10	5
Horizontal	Load capacity	Maximum load capacity (kg)	30	70
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	500	250
		Rated acceleration/deceleration (G)	0.3	0.15
		Maximum acceleration/deceleration (G)	0.3	0.15
Vertical	Load capacity	Maximum load capacity (kg)	－	－
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	－	－
		Rated acceleration/deceleration (G)	－	－
		Maximum acceleration/deceleration (G)	－	－
Thrust		Rated thrust (N)	169.5	340.1
Air purge		Pressure (Mpa)	0.1 - 0.2	0.1 - 0.2
Air purge		Flow rate (NI/min)	20 - 40	20 - 40
Brake		Brake specification	－
Brake		Brake retention force (kgf)	－	－
Stroke		Minimum stroke (mm)	100	100
		Maximum stroke (mm)	1000	1000
		Stroke pitch (mm)	50	50

Specification 2

Heading		Contents
Drive system		Ball screw φ16mm rolled, C10 [C5 equivalent]
Accuracy of Repeating Positioning.		±0.02Mm [±0.01mm]
Lost motion		0.05mm or less [0.02mm or less]
Linear guide		Infinite linear circulation type
Main material	Base	White alumite treated aluminum
	Slider	White alumite treated aluminum
	Side cover	White alumite treated aluminum
	Front cover	White alumite treated aluminum
	Actuator cable	Polyvinyl chloride (PVC)
Allowable static moment value		－
		－
		－
Allowable dynamic moment (Note 1)		Ma：81.0N･m
		Mb：116N･m
		Mc：189N･m
Ambient operating temperature and humidity		0 - 40℃, RH 85% and below (no condensation)
Protection grade		IP65
Vibration resistant/Shock resistant		4.9m/s²
Compatible to overseas standards		CE mark, RoHS compliant
Motor type		AC servo motor
Encoder type		Incremental/Absolute
Encoder pulse No.		16384 pulse/rev
Delivery		Written in [Reference for delivery] section of the homepage

(Note 1) For standard rated life of 10,000 km. Life time travelling distance differs based on operating condition and attached condition. Refer to page 1-244 for the running life span.

(Note) 【　】 are for ISPWA.

Slider type moment direction

Stroke and maximum speed

(Measured in mm/s)

Stroke lead	100 - 600	650 ・ 700	750 ・ 800	850 ・ 900	950 ・ 1000
10	500	455	365	300	250
5	250	225	180	150	125

Adaptive controller

The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.

Name	Max. connectable axis No.	Power source voltage	Control method															Maximum positioning points
			Positioner	Pulse train	Program	Network *Select
			Positioner	Pulse train	Program	DV	CC	CIE	PR	CN	ML	ML3	EC	EP	PRT	SSN	ECM
RCON	16 (ML3,SSN,ECM is 8)	DC24V, single phase AC200V, three phase AC200V	－	－	－	●	●	●	●	－	－	●	●	●	●	●	●	128 (Position data unavailable for ML3, SSN and ECM)
RSEL	8	DC24V, single phase AC200V, three phase AC200V	－	－	●	●	●	●	●	－	－	－	●	●	●	－	－	36000
SCON-CB/CGB	1	Single phase AC 100V/200V	●	●	－	●	●	●	●	●	●	●	●	●	●	－	●	512 (768 for network specification)
SSEL-CS	2	Single phase AC 100V/200V	●	－	●	●	●	－	●	－	－	－	－	●	－	－	－	20000
XSEL-P/Q	6	Single phase AC200V Three-phase AC200V	－	－	●	●	●	－	●	－	－	－	－	●	－	－	－	20000
XSEL-RA/SA	8	Single phase AC200V Three-phase AC200V	－	－	●	●	●	－	●	－	－	－	●	●	－	－	－	55000 (depending on type)

(Note) Refer to page 8-17 for network abbreviations such as DV and CC.

(Note) RCON-SC can't be connected to actuator of an absolute.

Oversea specification

Important notes on selection

(1) Maximum speed drops when the stroke length increase, preventing it from reaching the critical revolution value of the ball screws. Refer to "Stroke and maximum speed" for the maximum speed by stroke.
(2) The payload indicated in the "Main specification" shows the maximum value when operated at an acceleration of 0.3G.
(3) Protection class IP65 is the protection class achieved with an air purge. It will be IP54 instead without an air purge. The mounting posture is limited to horizontal placement with flat surface down. Please note that it will penetrate into the main body when used in a ceiling-mounted, horizontal or vertical position.
(4) The standard value for offset load lengths are 600mm and below, towards the direction of Ma, Mb and Mc.

Return to the page top

Dimension drawing

ST: Stroke

M.E.: Mechanical end

S.E.: Stroke end

(Note) The cable joint connector is a water-proof connector designated to connect the motor/encoder cable.

　Refer to page 1-115 for the cable to be connected.

(Note) The slider moves to the M.E. at homing. Please take extra care so that it may not collide with peripherals.

(Note) The allowable moment offset reference position is 75.5mm from the slider work mounting position.

Dimension by stroke length

Stroke	100	150	200	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000
L	508	558	608	658	708	758	808	858	908	958	1008	1058	1108	1158	1208	1258	1308	1358	1408
B	478	528	578	628	678	728	778	828	878	928	978	1028	1078	1128	1178	1228	1278	1328	1378
C	22	72	122	172	22	72	122	172	22	72	122	172	22	72	122	172	22	72	122
D	0	0	0	0	1	1	1	1	2	2	2	2	3	3	3	3	4	4	4
E	10	10	10	10	12	12	12	12	14	14	14	14	16	16	16	16	18	18	18

Mass by stroke length

Stroke	100	150	200	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000
Mass (kg)	11.7	12.6	13.4	14.3	15.1	16.0	16.8	17.7	18.5	19.4	20.2	21.1	21.9	22.8	23.6	24.5	25.3	26.2	27.0

Return to product information page top

ISWA-M-100ISPWA-M-100