LSAS-N10SM

Product feature

Attachment orientation

(Note) The image shown refers to a single slider.

Dimension drawing
Important notes on selection
Adaptive controller

Main specification

Specification 1

Heading			Contents
Horizontal	Load capacity	Maximum load capacity (kg)	15
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	2500
		Rated acceleration/deceleration (G)	0.5
		Maximum acceleration/deceleration (G)	3
	Thrust	Rated thrust (N)	54
	Thrust	Max. thrust (N)	162
Stroke		Minimum stroke (mm)	100
		Maximum stroke (mm)	3900
		Stroke pitch (mm)	100

Specification 2

Heading	Contents
Drive system	Linear servo motor
Accuracy of Repeating Positioning.	±0.005mm
Lost motion	0.02mm and below
Base	Material : Aluminum (Black anodized)
Linear guide	Infinite linear circulation type
Allowable static moment value	－
	－
	－
Allowable dynamic moment value (Note2)	Ma：76N･m
	Mb：46N･m
	Mc：25N･m
Ambient operating temperature and humidity	0 - 40℃, Max 85% RH and below (No condensation shall occur)
Protection grade	IP20
Vibration resistant/Shock resistant	4.9m/s² 100Hz and below
Compatible to overseas standards	RoHS compliant
Motor type	AC servo motor
Encoder type	Pseudo-absolute type serial encoder
Encoder pulse No.	1μm
Delivery	Written in [Reference for delivery] section of the homepage

(Note2) Values for standard load coefficient of 3.5 with standard rated life span of 10,000km. Life time travelling distance differs based on operating condition and attached condition. Please refer to page 1-342 for life time travelling distance.

Slider type moment direction

Stroke and maximum speed

(Measured in mm/s)

Stroke (mm)	100～3900 (100mm intervals)
Maximum speed (mm/s)	2500

Correlation Diagram of Acceleration and Load Capacity

The diagram shows the acceleration achieved at each load capacity, based on operation at a speed of 2500mm/s. Please use this information to select a suitable model which fulfils the desired carrying condition (work mass).

(Note) Take note that duty is not considered in the diagram.

Adaptive controller

The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.

Name	Max. connectable axis No.	Power source voltage	Control method															Maximum positioning points
			Positioner	Pulse train	Program	Network ※Select
			Positioner	Pulse train	Program	DV	CC	CIE	PR	CN	ML	ML3	EC	EP	PRT	SSN	ECM
SCON-CB/CGB	1	Single phase AC200V	●	●	－	●	●	●	●	●	●	●	●	●	●	－	－	512 (768 for network specification)
SCON-LC/LCG	1		－	－	●	●	●	－	●	●	●	－	●	●	●	－	－	512 (768 for network specification)
SSEL-CS	2		●	－	●	●	●	－	●	－	－	－	－	●	－	－	－	20000
XSEL-P/Q	6	Single phase AC200V Three-phase AC200V	－	－	●	●	●	－	●	－	－	－	－	●	－	－	－	20000
XSEL-RA/SA	8	Single phase AC200V Three-phase AC200V	－	－	●	●	●	－	●	－	－	－	●	●	－	－	－	55000 (Vary based on type)

(Note) Please refer page 7-15 for network abbreviations such as DV and CC.

(Note) Either 2 units of SCON, or a 2-axis controller is required to operate a multi slider.

(Note) Even though the controller driver output will be 100W, SCON controller size will be of 400W and above. (Refer page 7-154) Hence, please choose the number of regenerative resistance needed for each SCON unit based on an output of 400W.

Oversea specification

Important notes on selection

(1) In some cases where the strokes are too short, it may not be able to reach its maximum speed.
(2) Load capacity shown in the "Main specification" refers to their maximum load capacity. Load capacity differs based on operating condition. Please refer to "Correlation Diagram of Acceleration and Load Capacity" for further information.
(3) The product can’t be mounted in any position (e.g. vertical, laterally laid, suspended) excluding horizontal mounting.
(4) Standard value for offset load lengths are 340mm and below, towards the direction of Ma, Mb and Mc.

Return to the page top

Dimension drawing

ST: Stroke

M.E.: Mechanical end

*1 Cableveyor may expand, turning it slightly larger compared to the measurement below.

*2 Compatible to options and cableveyors for user with stroke length of 2000mm and below.

*3 Length, R will be "Diagram measurement -60mm" for specification for both options and cableveyor for user.

*4 Offset load length of cableveyor is as shown below.

Standard cableveyor: Max. 10mm

Cableveyor for user, or options: Max. 25mm

Dimension by stroke length

Stroke	100	200	300	400	500	600	700	800	900	1000	1100	1200	1300	1400	1500	1600	1700	1800	1900	2000	2100	2200	2300	2400	2500	2600	2700	2800	2900	3000	3100	3200	3300	3400	3500	3600	3700	3800	3900
L	560	660	760	860	960	1060	1160	1260	1360	1460	1560	1660	1760	1860	1960	2060	2160	2260	2360	2460	2560	2660	2760	2860	2960	3060	3160	3260	3360	3460	3560	3660	3760	3860	3960	4060	4160	4260	4360
B	554	654	754	854	954	1054	1154	1254	1354	1454	1554	1654	1754	1854	1954	2054	2154	2254	2354	2454	2554	2654	2754	2854	2954	3054	3154	3254	3354	3454	3554	3654	3754	3854	3954	4054	4154	4254	4354
C	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80	30	80
D	2	3	3	4	4	5	5	6	6	7	7	8	8	9	9	10	10	11	11	12	12	13	13	14	14	15	15	16	16	17	17	18	18	19	19	20	20	21	21
E	6	8	8	10	10	12	12	14	14	16	16	18	18	20	20	22	22	24	24	26	26	28	28	30	30	32	32	34	34	36	36	38	38	40	40	42	42	44	44
J	300	400	500	600	700	800	900	1000	1100	1200	1300	1400	1500	1600	1700	1800	1900	2000	2100	2200	2300	2400	2500	2600	2700	2800	2900	3000	3100	3200	3300	3400	3500	3600	3700	3800	3900	4000	4100
K	400	500	600	700	800	900	1000	1100	1200	1300	1400	1500	1600	1700	1800	1900	2000	2100	2200	2300	2400	2500	2600	2700	2800	2900	3000	3100	3200	3300	3400	3500	3600	3700	3800	3900	4000	4100	4200
R	230	280	330	380	430	480	530	580	630	680	730	780	830	880	930	980	1030	1080	1130	1180	1230	1280	1330	1380	1430	1480	1530	1580	1630	1680	1730	1780	1830	1880	1930	1980	2030	2080	2130

Mass by stroke length

Stroke	100	200	300	400	500	600	700	800	900	1000	1100	1200	1300	1400	1500	1600	1700	1800	1900	2000	2100	2200	2300	2400	2500	2600	2700	2800	2900	3000	3100	3200	3300	3400	3500	3600	3700	3800	3900
Mass (kg)	14.7	15.9	17.1	18.2	19.4	20.6	21.8	23.0	24.2	25.4	26.6	27.8	28.9	30.1	31.3	32.5	33.7	34.9	36.1	37.3	38.5	39.7	40.8	42.0	43.2	44.4	45.6	46.8	48.0	49.2	50.3	51.6	52.7	53.9	55.1	56.3	57.5	58.7	59.8

Return to product information page top