LSAS-N15HM

Product feature

Attachment orientation

(Note) The image shown refers to a single slider.

Main specification

HeadingContents
HorizontalLoad capacityMaximum load capacity (kg)30
Speed/ Acceleration/DecelerationMaximum speed (mm/s)2500
Rated acceleration/deceleration (G)0.5
Maximum acceleration/deceleration (G)3
ThrustRated thrust (N)125
Max. thrust (N)375
StrokeMinimum stroke (mm)150
Maximum stroke (mm)3850
Stroke pitch (mm)100

HeadingContents
Drive systemLinear servo motor
Accuracy of Repeating Positioning.±0.005mm
Lost motion0.02mm and below
BaseMaterial : Aluminum (Black anodized)
Linear guideInfinite linear circulation type
Allowable static moment value－
－
－
Allowable dynamic moment value
(Note2)		Ma：155N･m
Mb：91N･m
Mc：71N･m
Ambient operating temperature and humidity0 - 40℃, Max 85% RH and below (No condensation shall occur)
Protection gradeIP20
Vibration resistant/Shock resistant4.9m/s2 100Hz and below
Compatible to overseas standardsRoHS compliant
Motor typeAC servo motor
Encoder typePseudo-absolute type serial encoder
Encoder pulse No.1μm　
DeliveryWritten in [Reference for delivery] section of the homepage

(Note2) Values for standard load coefficient of 3.5 with standard rated life span of 10,000km. Life time travelling distance differs based on operating condition and attached condition. Please refer to page 1-342 for life time travelling distance.

Slider type moment direction

Stroke and maximum speed

(Measured in mm/s)

Stroke
(mm)		150～3850
(100mm intervals)
Maximum speed
(mm/s)		2500

Correlation Diagram of Acceleration and Load Capacity

The diagram shows the acceleration achieved at each load capacity, based on operation at a speed of 2500mm/s. Please use this information to select a suitable model which fulfils the desired carrying condition (work mass).

(Note) Take note that duty is not considered in the diagram.

Max. thrust

Max. thrust value differs based on slider's moving speed. Please use this value to choose a suitable model.

Adaptive controller

The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.

NameAppearanceMax. connectable
axis No.		Power source voltageControl methodMaximum positioning points
PositionerPulse trainProgramNetwork ※Select
DVCCCIEPRCNMLML3ECEPPRTSSNECM
SCON-CB/CGB1Single phase AC200V●●－●●●●●●●●●●－－512
(768 for network specification)
SCON-LC/LCG1－－●●●－●●●－●●●－－512
(768 for network specification)
SSEL-CS2●－●●●－●－－－－●－－－20000
XSEL-P/Q6Single phase AC200V
Three-phase AC200V		－－●●●－●－－－－●－－－20000
XSEL-RA/SA8－－●●●－●－－－●●－－－55000
(Vary based on type)

(Note) Please refer page 7-15 for network abbreviations such as DV and CC.

(Note) Either 2 units of SCON, or a 2-axis controller is required to operate a multi slider.

(Note) Even though the controller driver output will be 200W, SCON controller size will be of 400W and above. (Refer page 7-154) Hence, please choose the number of regenerative resistance needed for each SCON unit based on an output of 400W.

Oversea specification

Important notes on selection

(1) In some cases where the strokes are too short, it may not be able to reach its maximum speed.
(2) Load capacity shown in the "Main specification" refers to their maximum load capacity. Load capacity differs based on operating condition. Please refer to "Correlation Diagram of Acceleration and Load Capacity" for further information.
(3) The product can’t be mounted in any position (e.g. vertical, laterally laid, suspended) excluding horizontal mounting.
(4) Standard value for offset load lengths are 450mm and below, towards the direction of Ma, Mb and Mc.

Return to the page top

Dimension drawing

ST: Stroke

M.E.: Mechanical end

*1 Cableveyor may expand, turning it slightly larger compared to the measurement below.

*2 Compatible to options and cableveyors for user with stroke length of 2000mm and below.

*3 Length, R will be "Diagram measurement -55mm" for specification for both options and cableveyor for user.

*4 Offset load length of cableveyor is as shown below.

Standard cableveyor: Max. 10mm

Cableveyor for user, or options: Max. 25mm

Dimension by stroke length

Stroke15025035045055065075085095010501150125013501450155016501750185019502050215022502350245025502650275028502950305031503250335034503550365037503850
L71081091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410
B70480490410041104120413041404150416041704180419042004210422042304240425042604270428042904300431043204330434043504360437043804390440044104420443044404
C55105551055510555105551055510555105551055510555105551055510555105551055510555105551055510555105
D33445566778899101011111212131314141515161617171818191920202121
E88101012121414161618182020222224242626282830303232343436363838404042424444
J40050060070080090010001100120013001400150016001700180019002000210022002300240025002600270028002900300031003200330034003500360037003800390040004100
K500600700800900100011001200130014001500160017001800190020002100220023002400250026002700280029003000310032003300340035003600370038003900400041004200
R25530535540545550555560565570575580585590595510051055110511551205125513051355140514551505155516051655170517551805185519051955200520552105

Mass by stroke length

Stroke15025035045055065075085095010501150125013501450155016501750185019502050215022502350245025502650275028502950305031503250335034503550365037503850
Mass (kg)19.721.122.523.925.426.828.229.631.032.533.935.336.738.139.540.942.343.845.246.648.049.550.952.353.755.156.557.959.460.862.263.665.066.467.969.370.772.1