NS-LXMMA

Product feature

Attachment orientation

Dimension drawing
Important notes on selection
Adaptive controller

Main specification

Specification 1

Heading			Contents
Lead		Ball screw lead (mm)	40	20
Horizontal	Load capacity	Maximum load capacity (kg)	40	80
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	2400	1300
		Rated acceleration/deceleration (G)	0.3	0.3
		Maximum acceleration/deceleration (G)	1	1
Vertical	Load capacity	Maximum load capacity (kg)	－	－
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	－	－
		Rated acceleration/deceleration (G)	－	－
		Maximum acceleration/deceleration (G)	－	－
Thrust		Rated thrust (N)	170.0	340.1
Brake		Brake specification	－	－
Brake		Brake retention force (kgf)	－	－
Stroke		Minimum stroke (mm)	250	250
		Maximum stroke (mm)	2250	2250
		Stroke pitch (mm)	50	50

Specification 2

Heading	Contents
Drive system	Ball screw φ20mm, rolled C5 equivalent
Accuracy of Repeating Positioning.	±0.01mm
Lost motion	0.02mm and below
Base	Base: Aluminum, with white alumite treatment
Linear guide	Infinite linear circulation type
Allowable static moment value	Ma：374N･m
	Mb：533N･m
	Mc：884N･m
Allowable dynamic moment (Note3)	Ma：123N･m
	Mb：176N･m
	Mc：291N･m
Ambient operating temperature and humidity	0 - 40℃, 85% RH Max (Non-condensing)
Protection grade	－
Vibration resistant/Shock resistant	4.9m/s²
Compatible to overseas standards	CE mark, RoHS compliant
Motor type	AC servo motor
Encoder type	Incremental/Absolute
Encoder pulse number	16384 pulse/rev
Delivery	Written in [Reference for delivery] section of the homepage

(Note3) Assumes a basic rated life of 10,000km. Life time travelling distance differs based on operating condition and attached condition.

　Refer page 1-180 for the operating life.

Slider type moment direction

Load capacity by speed and acceleration table

The base unit for load capacity is kilogram (kg). Empty column refers to inoperable motion.

Orientation		Horizontal											Vertical
Lead (mm)	Maximum speed (mm/s)	Acceleration/Deceleration (G)
Lead (mm)	Maximum speed (mm/s)	0.2	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0	1.1	1.2	0.2	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0	1.1	1.2
40	2400	40	40	30	25	20	17	15	13	10			Operates only in horizontal orientation.
20	1300	80	80	60	48	40	34	30	27	24			Operates only in horizontal orientation.

Stroke and maximum speed

(Measured in mm/s)

Stroke lead	250 - 2250 (each 50mm)
40	2400
20	1300

Adaptive controller

The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.

Name	Max. connectable axis No.	Power source voltage	Control method															Maximum positioning points
			Positioner	Pulse train	Program	Network ※Select
			Positioner	Pulse train	Program	DV	CC	CIE	PR	CN	ML	ML3	EC	EP	PRT	SSN	ECM
RCON	16	DC24V, single phase AC200V, three phase AC200V	－	－	－	●	●	●	●	－	－	－	●	●	●	－	－	128
RSEL	8	DC24V, single phase AC200V, three phase AC200V	－	－	●	●	●	●	●	－	－	－	●	●	●	－	－	36000
SCON-CB/CGB	1	Single phase AC 200V	●	●	－	●	●	●	●	●	●	●	●	●	●	－	－	512 (768 for network specification)
SSEL-CS	2	Single phase AC 200V	●	－	●	●	●	－	●	－	－	－	－	●	－	－	－	20000
XSEL-P/Q	6	Single phase AC200V Three-phase AC200V	－	－	●	●	●	－	●	－	－	－	－	●	－	－	－	20000
XSEL-RA/SA	8	Single phase AC200V Three-phase AC200V	－	－	●	●	●	－	●	－	－	－	●	●	－	－	－	55000 (Vary based on type)

(Note) Refer to page 7-17 for network abbreviation symbols such as DV and CC.

(Note) 2 SCON units, or a 2-axis controller is required to control a multi slider.

(Note) RCON-SC can't be connected to actuator of an absolute.

Important notes on selection

(1) The load capacity shown in the "Main specification" refers to their maximum value. Please refer to "Load capacity by speed and acceleration table" for further information.
(2) Load capacity shown in "Main specification" refers to the value when operated in maximum speed.
(3) Precaution is required depending on attachment orientation. Refer to page 1-199 for further details.
(4) In any instance of fixing the cableveyor in mirroring position, please do so by fixing it upon rotating the body by 180°.
(5) The standard value for offset load lengths are 750mm and below, towards the direction of Ma, Mb and Mc.

Return to the page top

Oversea specification

Dimension drawing

ST: Stroke

M.E.: Mechanical end

(Note) Cable joint connector shall have the motor cable and encoder cable connected to it.

　Refer to page 1-106 for details of the cable.

(Note) Please be careful while returning to the home position, for there is a chance of collision while having the slider returning to the M.E. position.

(Note) Please be sure that cables installed in the cableveyor has a minimum external diameter of 2mm, while having each cables separated from others and from the inner wall by at 2mm or more.

(Note) External diameter of cable hose installed in the cableveyor has to be φ16.8 or less, and shall be aligned horizontally in a way that they do not cross over each other.

(Note) Cable may be damaged if the number of cable hoses stored exceeds the number specified in above specification, resulting in a considerable detrition in cable product life.

Dimension by stroke length

Stroke	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000	1050	1100	1150	1200	1250	1300	1350	1400	1450	1500	1550	1600	1650	1700	1750	1800	1850	1900	1950	2000	2050	2100	2150	2200	2250
L	828	878	928	978	1028	1078	1128	1178	1228	1278	1328	1378	1428	1478	1528	1578	1628	1678	1728	1778	1828	1878	1928	1978	2028	2078	2128	2178	2228	2278	2328	2378	2428	2478	2528	2578	2628	2678	2728	2778	2828
B	776	826	876	926	976	1026	1076	1126	1176	1226	1276	1326	1376	1426	1476	1526	1576	1626	1676	1726	1776	1826	1876	1926	1976	2026	2076	2126	2176	2226	2276	2326	2376	2426	2476	2526	2576	2626	2676	2726	2776
F	138	163	188	213	238	263	288	113	138	163	188	213	238	263	288	313	138	163	188	213	238	263	288	313	138	163	188	213	238	263	288	313	138	163	188	213	238	263	288	313	138
G	1	1	1	1	1	1	1	2	2	2	2	2	2	2	2	2	3	3	3	3	3	3	3	3	4	4	4	4	4	4	4	4	5	5	5	5	5	5	5	5	6
H	10	10	10	10	10	10	10	14	14	14	14	14	14	14	14	14	18	18	18	18	18	18	18	18	22	22	22	22	22	22	22	22	26	26	26	26	26	26	26	26	30

Mass by stroke length

Stroke	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000	1050	1100	1150	1200	1250	1300	1350	1400	1450	1500	1550	1600	1650	1700	1750	1800	1850	1900	1950	2000	2050	2100	2150	2200	2250
Mass (kg)	24.7	25.6	26.4	27.3	28.2	29.0	29.9	30.8	31.6	32.5	33.4	34.2	35.1	36.0	36.8	37.7	38.6	39.4	40.3	41.2	42.0	42.9	43.8	44.6	45.5	46.3	47.2	48.1	48.9	49.8	50.7	51.5	52.4	53.3	54.1	55.0	55.9	56.7	57.6	58.5	59.3

Return to product information page top