Product feature
Attachment orientation
Main specification
| Heading | Contents | ||||
|---|---|---|---|---|---|
| Type of ball screw | Ball screw | ||||
| Lead | Ball screw lead (mm) | 4 | 2 | 1 | |
| Horizontal | Load capacity | Maximum load capacity (kg) | 0.75 | 1.5 | 3 |
| Speed/ Acceleration/Deceleration | Maximum speed (mm/s) | 200 | 100 | 50 | |
| Rated acceleration/deceleration (G) | 0.3 | 0.3 | 0.2 | ||
| Maximum acceleration/deceleration (G) | 0.3 | 0.3 | 0.2 | ||
| Vertical | Load capacity (Note 2) | Maximum load capacity (kg) | 0.25 | 0.5 | 1 |
| Speed/ Acceleration/Deceleration | Maximum speed (mm/s) | 200 | 100 | 50 | |
| Rated acceleration/deceleration (G) | 0.2 | 0.2 | 0.2 | ||
| Maximum acceleration/deceleration (G) | 0.2 | 0.2 | 0.2 | ||
| Thrust | Rated thrust (N) | 42.7 | 85.5 | 170.9 | |
| Stroke | Minimum stroke (mm) | 25 | 25 | 25 | |
| Maximum stroke (mm) | 50 | 50 | 50 | ||
| Stroke pitch (mm) | 25 | 25 | 25 | ||
(Note 2) Assumes the main body fixed.
| Heading | Contents | |
|---|---|---|
| Drive system | Ball screw φ4mm rolled, C10 | |
| Accuracy of Repeating Positioning. | ±0.02mm | |
| Lost motion | 0.1mm or less | |
| Main material | Rod | SUJ2 |
| Frame | White alumite treated aluminum | |
| Rubber Cover | Chloroprene Rubber (CR) | |
| Actuator cable | Polyvinyl chloride (PVC) | |
| Rod non-rotation accuracy (Note 3) | ±0.05 degree | |
| Life time traveling distance | Lead1 3000km or 50 million round trips Lead2, 4 5000km or 50 million round trips | |
| Air purge | Not allowed | |
| Ambient operating temperature and humidity | 0 - 40℃, RH 85% and below (no condensation) | |
| Protection grade | IP52 | |
| Vibration resistant/Shock resistant | 4.9m/s2 | |
| Compatible to overseas standards | CE mark, RoHS compliant | |
| Motor type | AC servo motor | |
| Encoder type | Incremental | |
| Encoder pulse No. | 1048pulse/rev | |
| Delivery | Written in [Reference for delivery] section of the homepage | |
(Note 3) This is the displacement angle of the rod tip (initial value guideline) when the static allowable torque of the rod tip is applied while the rod is stored in the main body as much as possible.
Stroke and maximum speed
(Measured in mm/s)
| Stroke lead | 25 (mm) | 50 (mm) |
|---|---|---|
| 4 | 200 | |
| 2 | 100 | |
| 1 | 50 | |
Adaptive controller
The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.
| Name | Appearance | Max. connectable axis No. | Power source voltage | Control method | Maximum positioning points | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Positioner | Pulse train | Program | Network *Select | ||||||||||||||||
| DV | CC | CIE | PR | CN | ML | ML3 | EC | EP | PRT | SSN | ECM | ||||||||
| ACON-CB/CGB |  | 1 | DC24V | ● *Selectable | ● *Selectable | － | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | － | － | 512 (768 for network specification) |
| ACON-CYB/PLB/POB |  | 1 | ● *Selectable | ● *Selectable | － | － | － | － | － | － | － | － | － | － | － | － | － | 64 | |
| RCON |  | 16 (ML3,SSN,ECM is 8) | － | － | － | ● | ● | ● | ● | － | － | ● | ● | ● | ● | ● | ● | 128 (Position data unavailable for ML3, SSN and ECM) | |
| RSEL |  | 8 | － | － | ● | ● | ● | ● | ● | － | － | － | ● | ● | ● | － | － | 36000 | |
(Note) Refer to page 8-17 for network abbreviations such as DV and CC.
Oversea specification
Important notes on selection
 | (1) The horizontal payload indicated is the value assuming a there was a guide to prevent radial load and a moment load from being applied to the rod. Please refer to the guide-equipped type document (→ page 1-293) for the amount of tip deflection, running life, and allowable value of the force applied in the direction of rotation (allowable rotation torque) when the guide is not installed. (2) The guideline for usable duty varies depending on the operating conditions (transport mass, acceleration/deceleration, etc.). Refer to page 1-282 for further details. (3) The vertical payload is the value when the main body is fixed and the side bracket is operated. In vertical operation, the main body does not operate if the side bracket is fixed. (4) When using vertically, be careful of interference as the rod descends when the power turns off. (5) Encoder type box for model item will be "I" for simple absolute as well. (6) Safety measures may be required depending on the attachment orientation. Refer to page 1-261 for further details. |
Dimension drawing
ST: Stroke
M.E.: Mechanical end
S.E.: Stroke end
(Note) The rod moves to M.E. at homing. Please be careful of interference with surrounding objects.
(Note) The suction joint option is an intake/exhaust port.
(Note) The screwing depth should be equal or less than the indicated dimensions.
(Note) The connector at the end of the actuator cable is not subject to the protective structure.
Dimension by stroke length
| Stroke | 25 | 50 |
|---|---|---|
| L | 133 | 164 |
| A | 27.5 | 33.5 |
| D | 150.5 | 187.5 |
Mass by stroke length
| Stroke | 25 | 50 |
|---|---|---|
| Mass (kg) | 0.52 | 0.54 |
