RCP2-SRA4R

Product feature

Attachment orientation

Dimension drawing
Important notes on selection
Adaptive controller

Main specification

Specification 1

Heading			Contents
Lead		Ball screw lead (mm)	5	2.5
Horizontal	Load capacity	Maximum load capacity (kg)	25	35
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	250	125
		Minimum speed (mm/s)	7	4
		Rated acceleration/deceleration (G)	0.3	0.2
		Maximum acceleration/deceleration (G)	0.3	0.2
Vertical	Load capacity	Maximum load capacity (kg)	9	15
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	250	125
		Minimum speed (mm/s)	7	4
		Rated acceleration/deceleration (G)	0.2	0.2
		Maximum acceleration/deceleration (G)	0.2	0.2
Pressing motion		Max. pressing thrust (N)	112	224
Pressing motion		Max. pressing speed (mm/s)	20	20
Brake		Brake specification	Non-excitation electromagnetic brake
Brake		Brake retention force (kgf)	9	15
Stroke		Minimum stroke (mm)	20	20
		Maximum stroke (mm)	200	200
		Stroke length (mm) (Note2)	10	10

(Note2) It will be in 50mm intervals from 100mm onwards.

Specification 2

Heading	Contents
Drive system	Ball screw φ8mm, rolled C10
Accuracy of Repeating Positioning.	±0.05mm
Lost motion	0.1mm and below
Rod	φ22mm Material: Stainless steel
Non-rotational accuracy of rod	±1.5°
Allowable static torque at the rod tip	0.5N･m
Ambient operating temperature and humidity	0 - 40℃, Max 85% RH and below (Non-condensing)
Protection grade	IP30
Vibration resistant/Shock resistant	4.9m/s² 100Hz and below
Compatible to overseas standards	CE mark, RoHS compliant
Motor class	Pulse motor
Encoder by types	Incremental
Encoder pulse No.	800 pulse/rev
Delivery	Written in [Reference for delivery] section of the homepage

Load capacity by speed and acceleration table

The base unit for load capacity is kilogram (kg).

Lead 5

Orientation	Horizontal	Vertical
Speed	Acceleration/Deceleration (G)
(mm/s)	0.3	0.2
50	25	9
100	25	7
150	20	5
200	15	3.5
250	10	2

Lead 2.5

Orientation	Horizontal	Vertical
Speed	Acceleration/Deceleration (G)
(mm/s)	0.2	0.2
13	35	15
25	35	13.5
50	35	11
75	35	8
100	35	5.5
125	30	3

Stroke and maximum speed

(Measured in mm/s)

Stroke lead	20 - 200 (10mm interval)
5	250
2.5	125

Correlation diagram of pressing force and current limiting value

Adaptive controller

The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.

Name	Max. connectable axis No.	Power source voltage	Control method															Maximum positioning points
			Positioner	Pulse train	Program	Network ※Select
			Positioner	Pulse train	Program	DV	CC	CIE	PR	CN	ML	ML3	EC	EP	PRT	SSN	ECM
MCON-C/CG	8	DC24V	－	－	－	●	●	●	●	●	－	●	●	●	●	●	●	256
MCON-LC/LCG	6	DC24V	－	－	●	●	●	－	●	●	－	－	●	●	●	－	－	256
MSEL-PC/PG	4	Single phase AC 100 - 230V	－	－	●	●	●	－	●	－	－	－	●	●	●	－	－	30000
PCON-CB/CGB	1	DC24V	● ※Selectable	● ※Selectable	－	●	●	●	●	●	●	●	●	●	●	－	－	512 (768 for network specification)
PCON-CYB/PLB/POB	1		● ※Selectable	● ※Selectable	－	－	－	－	－	－	－	－	－	－	－	－	－	64
RCON	16		－	－	－	●	●	●	●	－	－	－	●	●	●	－	－	128
PSEL-CS	2		●	－	●	●	●	－	●	－	－	－	－	●	－	－	－	1500

(Note) Please refer to page 6 -13 for abbreviated names of network (e.g. DV, CC).

Oversea specification

Important notes on selection

(1) The load capacity shown in the "Main specification" refers to their maximum value. Please refer to "Load capacity by speed and acceleration table" for further information.
(2) Horizontal load capacity shown assumes an operation running with an external guide. Detent mechanism may get damaged if a force was applied to the rod, except towards its moving direction.
(3) Refer "Correlation of pressing force and current limit value" for further information on pressing motion. Pressing force shown are their standard value. Please refer to page 1-427 for further information.
(4) Safety measures may be required based on mounting orientation. Please refer to page 1-379 for further information.
(5) Encoder type box for model item will be "I" for simple absolute as well.

Return to the page top

Dimension drawing

ST: Stroke

M.E.: Mechanical end

S.E.: Stroke end

(Note) Connect motor / encoder to the cable joint connector. Please refer to page 1-291 for the further details about the cable.

(Note) The rod moves to the M.E. upon returning to origin, so please take precaution that it may not interfere with anything while the returning process is running.

(Note) The direction the width between two flats are facing differs by product.

(Note) The external dimension will be the same for both with or without brake. Minimum stroke for brake equipped specification from 70mm. (Does not support any intended use of 60mm and below)

Dimension by stroke length

Stroke	20	30	40	50	60	70	80	90	100	150	200
L	84	94	104	114	124	134	144	154	164	214	264
B	62	72	82	92	102	112	122	132	142	192	242
C	30	40	50	60	70	30	40	50	60	60	60
D	0	0	0	0	0	1	1	1	1	2	3
E	4	4	4	4	4	6	6	6	6	8	10

Mass by stroke length

Stroke		20	30	40	50	60	70	80	90	100	150	200
Mass (kg)	Brake present	0.83	0.89	0.96	1.02	1.08	1.14	1.21	1.27	1.33	1.64	1.95
Mass (kg)	Brake absent	－	－	－	－	－	1.35	1.41	1.47	1.53	1.84	2.15

Return to product information page top

Stroke	20	30	40	50	60	70	80	90	100	150	200
L	84	94	104	114	124	134	144	154	164	214	264
B	62	72	82	92	102	112	122	132	142	192	242
C	30	40	50	60	70	30	40	50	60	60	60
D	0	0	0	0	0	1	1	1	1	2	3
E	4	4	4	4	4	6	6	6	6	8	10

Stroke	20	30	40	50	60	70	80	90	100	150	200
L	84	94	104	114	124	134	144	154	164	214	264
B	62	72	82	92	102	112	122	132	142	192	242
C	30	40	50	60	70	30	40	50	60	60	60
D	0	0	0	0	0	1	1	1	1	2	3
E	4	4	4	4	4	6	6	6	6	8	10

Stroke	20	30	40	50	60	70	80	90	100	150	200
L	84	94	104	114	124	134	144	154	164	214	264
B	62	72	82	92	102	112	122	132	142	192	242
C	30	40	50	60	70	30	40	50	60	60	60
D	0	0	0	0	0	1	1	1	1	2	3
E	4	4	4	4	4	6	6	6	6	8	10