Product feature
Attachment orientation
Main specification
| Heading | Contents | |||||
|---|---|---|---|---|---|---|
| Lead | Ball screw lead (mm) | 30 | 20 | 10 | 5 | |
| Horizontal | Load capacity | Maximum load capacity (kg) | 28 | 60 | 70 | 80 |
| Speed/ Acceleration/Deceleration | Maximum speed (mm/s) | 1200 | 1000 | 500 | 250 | |
| Minimum speed (mm/s) | 38 | 25 | 13 | 7 | ||
| Rated acceleration/deceleration (G) | 0.1 | 0.1 | 0.7 | 1 | ||
| Maximum acceleration/deceleration (G) | 1 | 1 | 1 | 1 | ||
| Vertical | Load capacity | Maximum load capacity (kg) | 3 | 4 | 25 | 55 |
| Speed/ Acceleration/Deceleration | Maximum speed (mm/s) | 850 | 800 | 500 | 250 | |
| Minimum speed (mm/s) | 38 | 25 | 13 | 7 | ||
| Rated acceleration/deceleration (G) | 0.5 | 0.5 | 0.5 | 0.5 | ||
| Maximum acceleration/deceleration (G) | 0.5 | 0.5 | 0.5 | 0.5 | ||
| Pressing motion | Max. pressing thrust (N) | 159 | 239 | 478 | 956 | |
| Max. pressing speed (mm/s) | 20 | 20 | 20 | 20 | ||
| Brake | Brake specification | Non-excitation electromagnetic brake | ||||
| Brake retention force (kgf) | 3 | 4 | 25 | 80 | ||
| Stroke | Minimum stroke (mm) | 50 | 50 | 50 | 50 | |
| Maximum stroke (mm) | 1100 | 1100 | 1100 | 1100 | ||
| Stroke pitch (mm) | 50 | 50 | 50 | 50 | ||
| Heading | Contents |
|---|---|
| Drive system | Ball screw φ16mm, rolled C10 |
| Positioning repeatability (Note3) | ±0.01mm 【±0.005mm】 |
| Lost motion | 0.1mm and below |
| Base | Base: Aluminum, with white alumite treatment |
| Linear guide | Infinite linear circulation type |
| Allowable static moment value | Ma：219N･m |
| Mb：219N･m | |
| Mc：414N･m | |
| Allowable dynamic moment value (Note4) | Ma：77N･m |
| Mb：77N･m | |
| Mc：146N･m | |
| Ambient operating temperature and humidity | 0 - 40℃, RH 85% and below (no condensation) |
| Protection grade | IP20 |
| Vibration resistant/Shock resistant | 4.9m/s2 |
| Compatible to overseas standards | CE mark, RoHS compliant |
| Motor type | Pulse motor |
| Encoder type | Battery-less absolute |
| Encoder pulse number | 8192 pulse/rev |
| Delivery | Written in [Reference for delivery] section of the homepage |
(Note3) 【 】 applies for high precision specification (lead 5 and 10).
(Note4) Assumes a standard rated life of 5,000km Life time travelling distance differs based on operating condition and attached condition. Refer page 1-180 for the operating life.
Slider type moment direction
Load capacity by speed and acceleration table
The base unit for load capacity is kilogram (kg). Empty column refers to inoperable motion.
| Orientation | Horizontal | Vertical | ||||||
|---|---|---|---|---|---|---|---|---|
| Speed | Acceleration/Deceleration (G) | |||||||
| (mm/s) | 0.1 | 0.3 | 0.5 | 0.7 | 1 | 0.1 | 0.3 | 0.5 |
| 0 | 28 | 26 | 20 | 16 | 13 | 3 | 3 | 3 |
| 100 | 28 | 26 | 20 | 16 | 13 | 3 | 3 | 3 |
| 200 | 28 | 26 | 20 | 16 | 13 | 2 | 2 | 2 |
| 400 | 28 | 24 | 18 | 15 | 11 | 1.5 | 1.5 | 1 |
| 650 | 21 | 18 | 15 | 12 | 8 | 1 | 1 | 1 |
| 850 | 14 | 10 | 7 | 5 | 1 | 1 | ||
| 1000 | 8 | 6 | 3 | 2 | ||||
| 1200 | 4 | 2 | 1 | 0.5 | ||||
| Orientation | Horizontal | Vertical | ||||||
|---|---|---|---|---|---|---|---|---|
| Speed | Acceleration/Deceleration (G) | |||||||
| (mm/s) | 0.1 | 0.3 | 0.5 | 0.7 | 1 | 0.1 | 0.3 | 0.5 |
| 0 | 60 | 51 | 45 | 40 | 35 | 4 | 4 | 4 |
| 50 | 60 | 51 | 45 | 40 | 32 | 4 | 4 | 4 |
| 100 | 60 | 51 | 45 | 33 | 30 | 4 | 4 | 4 |
| 200 | 60 | 51 | 45 | 33 | 25 | 4 | 4 | 4 |
| 300 | 60 | 51 | 40 | 30 | 23 | 4 | 4 | 4 |
| 400 | 50 | 35 | 30 | 23 | 20 | 2 | 2 | 2 |
| 650 | 50 | 20 | 15 | 8 | 6 | 2 | 2 | 2 |
| 800 | 10 | 6 | 2 | 1 | 1 | 0.5 | ||
| 900 | 7 | 3 | 0.5 | |||||
| 1000 | 4 | 1 | ||||||
| Orientation | Horizontal | Vertical | ||||||
|---|---|---|---|---|---|---|---|---|
| Speed | Acceleration/Deceleration (G) | |||||||
| (mm/s) | 0.1 | 0.3 | 0.5 | 0.7 | 1 | 0.1 | 0.3 | 0.5 |
| 0 | 70 | 70 | 70 | 70 | 65 | 25 | 25 | 25 |
| 50 | 70 | 70 | 70 | 70 | 65 | 25 | 25 | 25 |
| 100 | 70 | 70 | 70 | 70 | 65 | 25 | 25 | 25 |
| 200 | 70 | 65 | 50 | 40 | 35 | 20 | 20 | 20 |
| 250 | 70 | 62 | 40 | 31 | 26 | 13 | 12 | 12 |
| 300 | 70 | 60 | 30 | 25 | 20 | 10 | 9 | 9 |
| 400 | 70 | 25 | 15 | 8 | 5 | 5 | 3 | 2 |
| 500 | 55 | 10 | 2 | 3 | 1 | |||
| Orientation | Horizontal | Vertical | ||||||
|---|---|---|---|---|---|---|---|---|
| Speed | Acceleration/Deceleration (G) | |||||||
| (mm/s) | 0.1 | 0.3 | 0.5 | 0.7 | 1 | 0.1 | 0.3 | 0.5 |
| 0 | 80 | 80 | 80 | 80 | 80 | 55 | 55 | 55 |
| 50 | 80 | 80 | 80 | 80 | 80 | 55 | 55 | 55 |
| 75 | 80 | 80 | 80 | 80 | 80 | 30 | 30 | 30 |
| 100 | 80 | 80 | 80 | 80 | 80 | 18 | 18 | 18 |
| 125 | 80 | 80 | 80 | 70 | 70 | 18 | 18 | 18 |
| 175 | 80 | 70 | 40 | 30 | 25 | 14 | 12 | 10 |
| 200 | 80 | 50 | 20 | 10 | 5 | 10 | 6 | 5 |
| 225 | 80 | 20 | 5 | 7 | 1 | |||
| 250 | 80 | 5 | ||||||
Stroke and maximum speed
(Measured in mm/s)
| Lead (mm) | 50 - 650 (50mm intervals) | 700 （mm） | 750 （mm） | 800 （mm） | 850 （mm） | 900 （mm） | 950 （mm） | 1000 （mm） | 1050 （mm） | 1100 （mm） |
|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 1200 ＜850＞ | 1155 ＜850＞ | 1040 ＜850＞ | 940 ＜850＞ | 855 ＜850＞ | 780 | 715 | 660 | ||
| 20 | 1000 ＜800＞ | 950 ＜800＞ | 860 ＜800＞ | 770 | 695 | 630 | 570 | 520 | 480 | 440 |
| 10 | 500 | 480 | 430 | 385 | 345 | 310 | 285 | 260 | 235 | 220 |
| 5 | 250 | 240 | 215 | 190 | 175 | 155 | 140 | 130 | 120 | 110 |
(Note) < > is applicable when operated vertically.
Correlation diagram of pressing force and current limiting value
Adaptive controller
The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.
| Name | Appearance | Max. connectable axis No. | Power source voltage | Control method | Maximum positioning points | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Positioner | Pulse train | Program | Network ※Select | ||||||||||||||||
| DV | CC | CIE | PR | CN | ML | ML3 | EC | EP | PRT | SSN | ECM | ||||||||
| MSEL-PCF/PGF |  | 4 | Single phase AC 100 - 230V | － | － | ● | ● | ● | － | ● | － | － | － | ● | ● | ● | － | － | 30000 |
| PCON-CFB/CGFB |  | 1 | DC24V | ● ※Selectable | ● ※Selectable | － | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | － | － | 512 (768 for network specification) |
| RCON |  | 16 | － | － | － | ● | ● | ● | ● | － | － | － | ● | ● | ● | － | － | 128 | |
| RSEL |  | 8 | － | － | ● | ● | ● | ● | ● | － | － | － | ● | ● | ● | － | － | 36000 | |
(Note) Refer to page 7-17 for network abbreviation symbols such as DV and CC.
(Note) For the built-in controller of RCP6S series, see page 7-103.
(Note) The product can't be connected to the 3rd and 4th axis of MSEL-PCF/PGF.
Oversea specification
Important notes on selection
 | (1) The load capacity shown in the "Main specification" refers to their maximum value. Please refer to "Load capacity by speed and acceleration table" for further information. (2) Please refer to "Correlation diagram of pressing force and current limiting value" if you wish to have pressing motions to be carried out. Pressing force shown are their standard value. Refer page 1-269 for notes to be considered. (3) Precaution is required depending on attachment orientation. Refer to page 1-199 for further details. (4) The standard value for offset load lengths are 400mm and below, towards the direction of Ma, Mb and Mc. For the overhang load length, please see the figure on page 1-16. |
Dimension drawing
RCP6-SA8C
ST: Stroke
M.E.: Mechanical end
S.E.: Stroke end
(Note) Ensure the slider does not collide with other items, for it will return to M.E. after homing process.
Dimension by stroke length
| Stroke | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1050 | 1100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L | Brake present | 421 | 471 | 521 | 571 | 621 | 671 | 721 | 771 | 821 | 871 | 921 | 971 | 1021 | 1071 | 1121 | 1171 | 1221 | 1271 | 1321 | 1371 | 1421 | 1471 |
| Brake absent | 471 | 521 | 571 | 621 | 671 | 721 | 771 | 821 | 871 | 921 | 971 | 1021 | 1071 | 1121 | 1171 | 1221 | 1271 | 1321 | 1371 | 1421 | 1471 | 1521 | |
| A | 275 | 325 | 375 | 425 | 475 | 525 | 575 | 625 | 675 | 725 | 775 | 825 | 875 | 925 | 975 | 1025 | 1075 | 1125 | 1175 | 1225 | 1275 | 1325 | |
| B | 230 | 280 | 330 | 380 | 430 | 480 | 530 | 580 | 630 | 680 | 730 | 780 | 830 | 880 | 930 | 980 | 1030 | 1080 | 1130 | 1180 | 1230 | 1280 | |
| D | 1 | 2 | 2 | 3 | 3 | 4 | 4 | 5 | 5 | 6 | 6 | 7 | 7 | 8 | 8 | 9 | 9 | 10 | 10 | 11 | 11 | 12 | |
| E | 4 | 6 | 6 | 8 | 8 | 10 | 10 | 12 | 12 | 14 | 14 | 16 | 16 | 18 | 18 | 20 | 20 | 22 | 22 | 24 | 24 | 26 | |
| J | 0 | 0 | 80 | 180 | 180 | 280 | 280 | 380 | 380 | 480 | 480 | 580 | 580 | 680 | 680 | 780 | 780 | 880 | 880 | 980 | 980 | 1080 | |
| K | 0 | 100 | 100 | 200 | 200 | 300 | 300 | 400 | 400 | 500 | 500 | 600 | 600 | 700 | 700 | 800 | 800 | 900 | 900 | 1000 | 1000 | 1100 | |
| M | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | |
Mass by stroke length
| Stroke | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1050 | 1100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mass (kg) | Brake present | 4.5 | 4.7 | 5.0 | 5.3 | 5.5 | 5.8 | 6.1 | 6.4 | 6.6 | 6.9 | 7.2 | 7.5 | 7.7 | 8.0 | 8.3 | 8.5 | 8.8 | 9.1 | 9.4 | 9.6 | 9.9 | 10.2 |
| Brake absent | 5.0 | 5.2 | 5.5 | 5.8 | 6.1 | 6.3 | 6.6 | 6.9 | 7.1 | 7.4 | 7.7 | 8.0 | 8.2 | 8.5 | 8.8 | 9.1 | 9.3 | 9.6 | 9.9 | 10.1 | 10.4 | 10.7 | |
RCP6S-SA8C
ST: Stroke
M.E.: Mechanical end
S.E.: Stroke end
(Note) Ensure the slider does not collide with other items, for it will return to M.E. after homing process.
Dimension by stroke length
| Stroke | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1050 | 1100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L | Brake present | 459 | 509 | 559 | 609 | 659 | 709 | 759 | 809 | 859 | 909 | 959 | 1009 | 1059 | 1109 | 1159 | 1209 | 1259 | 1309 | 1359 | 1409 | 1459 | 1509 |
| Brake absent | 509 | 559 | 609 | 659 | 709 | 759 | 809 | 859 | 909 | 959 | 1009 | 1059 | 1109 | 1159 | 1209 | 1259 | 1309 | 1359 | 1409 | 1459 | 1509 | 1559 | |
| A | 275 | 325 | 375 | 425 | 475 | 525 | 575 | 625 | 675 | 725 | 775 | 825 | 875 | 925 | 975 | 1025 | 1075 | 1125 | 1175 | 1225 | 1275 | 1325 | |
| B | 230 | 280 | 330 | 380 | 430 | 480 | 530 | 580 | 630 | 680 | 730 | 780 | 830 | 880 | 930 | 980 | 1030 | 1080 | 1130 | 1180 | 1230 | 1280 | |
| D | 1 | 2 | 2 | 3 | 3 | 4 | 4 | 5 | 5 | 6 | 6 | 7 | 7 | 8 | 8 | 9 | 9 | 10 | 10 | 11 | 11 | 12 | |
| E | 4 | 6 | 6 | 8 | 8 | 10 | 10 | 12 | 12 | 14 | 14 | 16 | 16 | 18 | 18 | 20 | 20 | 22 | 22 | 24 | 24 | 26 | |
| J | 0 | 0 | 80 | 180 | 180 | 280 | 280 | 380 | 380 | 480 | 480 | 580 | 580 | 680 | 680 | 780 | 780 | 880 | 880 | 980 | 980 | 1080 | |
| K | 0 | 100 | 100 | 200 | 200 | 300 | 300 | 400 | 400 | 500 | 500 | 600 | 600 | 700 | 700 | 800 | 800 | 900 | 900 | 1000 | 1000 | 1100 | |
| M | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | |
Mass by stroke length
| Stroke | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1050 | 1100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mass (kg) | Brake present | 4.7 | 4.9 | 5.2 | 5.5 | 5.8 | 6.0 | 6.3 | 6.6 | 6.9 | 7.1 | 7.4 | 7.7 | 7.9 | 8.2 | 8.5 | 8.8 | 9.0 | 9.3 | 9.6 | 9.9 | 10.1 | 10.4 |
| Brake absent | 5.2 | 5.5 | 5.7 | 6.0 | 6.3 | 6.5 | 6.8 | 7.1 | 7.4 | 7.6 | 7.9 | 8.2 | 8.5 | 8.7 | 9.0 | 9.3 | 9.5 | 9.8 | 10.1 | 10.4 | 10.6 | 10.9 | |