SSPA-LXM-750

Product feature

Attachment orientation

Catalogue (PDF)

User's manual PDF

2 dimensional CAD drawing

Parametric CAD drawing

Request for information materials

Dimension drawing
Important notes on selection
Adaptive controller

Model specification

Specification 1

Heading			Contents
Lead		Ball screw lead (mm)	50	25
Horizontal	Load capacity	Maximum load capacity (kg)	60	120
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	2500	1250
		Rated acceleration/deceleration (G)	0.4	0.4
		Maximum acceleration/deceleration (G)	1.2	1.2
Vertical	Load capacity	Maximum load capacity (kg)	12	25
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	2500	1250
		Rated acceleration/deceleration (G)	0.4	0.4
		Maximum acceleration/deceleration (G)	1.2	1.2
Thrust		Rated thrust (N)	255	510
Brake		Brake specification	Non-excitation electromagnetic brake
Brake		Brake retention force (kgf)	12	25
Stroke		Minimum stroke (mm)	100	100
		Maximum stroke (mm)	1500	1500
		Stroke pitch (mm)	50	50

Specification 2

Heading	Contents
Drive system	Ball screw φ25mm, rolled C5 equivalent
Accuracy of Repeating Positioning.	±0.005mm
Lost motion	0.02mm and below
Base	Base: Cast iron, with coating
Linear guide	Infinite linear circulation type
Allowable static moment value	Ma：750N･m
	Mb：750N･m
	Mc：1850N･m
Allowable dynamic moment (Note3)	Ma：162N･m
	Mb：162N･m
	Mc：391N･m
Ambient operating temperature and humidity	0 - 40℃, Max 85% RH and below (No condensation shall occur)
Protection grade	－
Vibration resistant/Shock resistant	4.9m/s² 100Hz and below
Compatible to overseas standards	CE mark, RoHS compliant
Motor type	AC servo motor
Encoder type	Incremental/Absolute
Encoder pulse No.	16384 pulse/rev
Delivery	Written in [Reference for delivery] section of the homepage

(Note3) Assumes a basic rated life of 10,000km. Life time travelling distance differs based on operating condition and attached condition. Please refer to page 1-360 for life time travelling distance.

Slider type moment direction

Load capacity by speed and acceleration table

The base unit for load capacity is kilogram (kg). Empty column refers to inoperable motion.

Orientation		Horizontal																			Vertical
Lead (mm)	Maximum speed (mm/s)	Acceleration (G)
Lead (mm)	Maximum speed (mm/s)	0.2	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0	1.1	1.2	1.3	1.4	1.5	1.6	1.7	1.8	1.9	2.0	0.2	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0	1.1	1.2	1.3	1.4	1.5	1.6
50	2500	60	60	60	48	40	34	30	27	24	22	20									12	12	12	10	8	7	6	5	5	4	4
25	1250	120	120	120	96	80	69	60	53	48	44	40									25	25	25	20	17	14	13	11	10	9	8

Stroke and maximum speed

(Measured in mm/s)

Stroke lead	100～900	950	1000	1050	1100	1150	1200	1250	1300	1350	1400	1450	1500
50	2500	2320		1950		1660		1440		1250		1100
25	1250	1160		970		830		720		620		550

Load capacity and acceleration/deceleration during offboard tuning

	Lead	Load capacity by acceleration/deceleration (kg)																				Max. speed (mm/s)
	Lead	0.1G	0.2G	0.3G	0.4G	0.5G	0.6G	0.7G	0.8G	0.9G	1.0G	1.1G	1.2G	1.3G	1.4G	1.5G	1.6G	1.7G	1.8G	1.9G	2.0G	Standard	After tuning
Horizontal	50	90	78	69	60	48	40	34	30	27	24	22	20	18	16	14	12	11	10	9	8	2500	2500
Horizontal	25	180	156	138	120	96	80	69	60	53	48	44	40	36	32	28	25	22	19	17	15	1250	1250

The base unit for load capacity is kilogram (kg).

Adaptive controller

The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.

Name	Max. connectable axis No.	Power source voltage	Control method														Maximum positioning points
			Positioner	Pulse train	Program	Network ※Select
			Positioner	Pulse train	Program	DV	CC	PR	CN	ML	ML3	EC	EP	PRT	SSN	ECM
SCON-CB/CGB	1	Single phase AC200V	●	●	－	●	●	●	●	●	●	●	●	●	－	－	512 (768 for network specification)
SCON-LC/LCG	1		－	－	●	●	●	●	●	●	－	●	●	●	－	－	512 (768 for network specification)
SSEL-CS	2		●	－	●	●	●	●	－	－	－	－	●	－	－	－	20000
XSEL-P/Q	6	Single phase AC200V Three-phase AC200V	－	－	●	●	●	●	－	－	－	－	●	－	－	－	20000
XSEL-RA/SA	8	Single phase AC200V Three-phase AC200V	－	－	●	●	●	●	－	－	－	●	●	－	－	－	55000 (Vary based on type)

(Note) Please refer to page 6 -13 for abbreviated names of network (e.g. DV, CC).

Oversea specification

Important notes on selection

(1) The load capacity shown in the "Main specification" refers to their maximum value. Please refer to "Load capacity by speed and acceleration table" for further information.
(2) Safety measures may be required depending on the attachment orientation. Please refer to page 1-379 for further information.
(3) The standard value for offset load lengths are 750mm and below, towards the direction of Ma, Mb and Mc.

Return to the page top

Dimension drawing

ST: Stroke

M.E.: Mechanical end

S.E.: Stroke end

(Note) Cable joint connector shall have the motor cable and encoder cable connected to it.

Please refer to page 1-296 for the cables.

(Note) Please be careful while returning to the home position, for there is a chance of collision while having the slider returning to the M.E. position.

(Note) Please take note that return setting has to be adjusted to change the originating direction.

Dimension by stroke length

Stroke		100	150	200	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000	1050	1100	1150	1200	1250	1300	1350	1400	1450	1500
L	Brake present	540	590	640	690	740	790	840	890	940	990	1040	1090	1140	1190	1240	1290	1340	1390	1440	1490	1540	1590	1640	1690	1740	1790	1840	1890	1940
L	Brake absent	577	627	677	727	777	827	877	927	977	1027	1077	1127	1177	1227	1277	1327	1377	1427	1477	1527	1577	1627	1677	1727	1777	1827	1877	1927	1977
A		366	416	466	516	566	616	666	716	766	816	866	916	966	1016	1066	1116	1166	1216	1266	1316	1366	1416	1466	1516	1566	1616	1666	1716	1766
B		320	370	420	470	520	570	620	670	720	770	820	870	920	970	1020	1070	1120	1170	1220	1270	1320	1370	1420	1470	1520	1570	1620	1670	1720
C		170	220	70	120	170	220	70	120	170	220	70	120	170	220	70	120	170	220	70	120	170	220	70	120	170	220	70	120	170
D		0	0	1	1	1	1	2	2	2	2	3	3	3	3	4	4	4	4	5	5	5	5	6	6	6	6	7	7	7
E		4	4	6	6	6	6	8	8	8	8	10	10	10	10	12	12	12	12	14	14	14	14	16	16	16	16	18	18	18
F		60	85	10	35	60	85	10	35	60	85	10	35	60	85	10	35	60	85	10	35	60	85	10	35	60	85	10	35	60
G		1	1	2	2	2	2	3	3	3	3	4	4	4	4	5	5	5	5	6	6	6	6	7	7	7	7	8	8	8
H		2	2	3	3	3	3	4	4	4	4	5	5	5	5	6	6	6	6	7	7	7	7	8	8	8	8	9	9	9
J		100	150	200	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000	1050	1100	1150	1200	1250	1300	1350	1400	1450	1500

Mass by stroke length

Stroke		100	150	200	250	300	350	400	450	500	550	600	650	700	750	800	850	900	950	1000	1050	1100	1150	1200	1250	1300	1350	1400	1450	1500
Mass (kg)	Brake present	21.0	23.0	25.0	26.5	28.0	29.5	31.0	33.0	35.0	36.5	38.0	39.5	41.0	43.0	45.0	46.5	48.0	49.5	51.0	52.5	54.0	56.0	58.0	59.5	61.0	62.5	64.0	66.0	68.0
Mass (kg)	Brake absent	22.0	24.0	26.0	27.5	29.0	30.5	32.0	34.0	36.0	37.5	39.0	40.5	42.0	44.0	46.0	47.5	49.0	50.5	52.0	53.5	55.0	57.0	59.0	60.5	62.0	63.5	65.0	67.0	69.0

Return to product information page top