Product feature
Attachment orientation
Main specification
| Heading | Contents | |||||
|---|---|---|---|---|---|---|
| Lead | Ball screw lead (mm) | 24 | 16 | 8 | 4 | |
| Horizontal | Load capacity | Max. load capacity (kg) (Power saving disabled) | 20 | 50 | 60 | 80 |
| Max. load capacity (kg) (Power saving enabled) | 18 | 40 | 50 | 55 | ||
| Speed/ Acceleration/Deceleration | Maximum speed (mm/s) | 860 | 700 | 350 | 175 | |
| Minimum speed (mm/s) | 30 | 20 | 10 | 5 | ||
| Rated acceleration/deceleration (G) | 0.3 | 0.3 | 0.3 | 0.3 | ||
| Maximum acceleration/deceleration (G) | 1 | 1 | 1 | 1 | ||
| Vertical | Load capacity | Max. load capacity (kg) (Power saving disabled) | 3 | 8 | 18 | 19 |
| Max. load capacity (kg) (Power saving enabled) | 3 | 5 | 17.5 | 19 | ||
| Speed/ Acceleration/Deceleration | Maximum speed (mm/s) | 640 | 560 | 350 | 175 | |
| Minimum speed (mm/s) | 30 | 20 | 10 | 5 | ||
| Rated acceleration/deceleration (G) | 0.3 | 0.3 | 0.3 | 0.3 | ||
| Maximum acceleration/deceleration (G) | 0.5 | 0.5 | 0.5 | 0.5 | ||
| Pressing motion | Max. pressing thrust (N) | 182 | 273 | 547 | 1094 | |
| Max. pressing speed (mm/s) | 20 | 20 | 20 | 20 | ||
| Brake | Brake specification | Non-excitation electromagnetic brake | ||||
| Brake retention force (kgf) | 3 | 8 | 18 | 19 | ||
| Stroke | Minimum stroke (mm) | 50 | 50 | 50 | 50 | |
| Maximum stroke (mm) | 300 | 300 | 300 | 300 | ||
| Stroke pitch (mm) | 50 | 50 | 50 | 50 | ||
| Heading | Contents | |
|---|---|---|
| Drive system | Ball screw φ12mm, rolled C10 | |
| Accuracy of Repeating Positioning. | ±0.05mm | |
| Lost motion | - (Can't be shown as this is a 2-point positioning function) | |
| Main material | Rod | φ30mm Material: Aluminum Hard alumite plated |
| Frame | Material : Aluminum (Black anodized) | |
| Dust seal | Rubber (NBR) | |
| Actuator cable | Polyvinyl chloride (PVC) | |
| Rod non-rotation accuracy (Note 6) | ±1.5 degrees | |
| Allowable load / torque for the rod tip | 0.5Nm | |
| Ambient operating temperature and humidity | 0 - 40℃, 85% RH Max (Non-condensing) | |
| Protection grade | IP67 | |
| Vibration resistant/Shock resistant | 4.9m/s2 | |
| Compatible to overseas standards | CE mark, RoHS compliant | |
| Motor type | Pulse motor (□56) | |
| Encoder type | Incremental / Battery-less absolute | |
| Encoder pulse No. | 800 pulse/rev | |
| Delivery | Written in [Reference for delivery] section of the homepage | |
(Note 6) This is the displacement angle of the rod tip (initial value guideline) when the static allowable torque of the rod tip is applied while the rod is stored in the main body as much as possible.
Load capacity by speed and acceleration table
Power saving setting disabled The unit of load capacity is kg. Empty column refers to inoperable motion.
| Orientation | Horizontal | Vertical | ||||
|---|---|---|---|---|---|---|
| Speed | Acceleration (G) | |||||
| (mm/s) | 0.3 | 0.5 | 0.7 | 1 | 0.3 | 0.5 |
| 0 | 20 | 18 | 15 | 12 | 3 | 3 |
| 200 | 20 | 18 | 15 | 12 | 3 | 3 |
| 400 | 20 | 14 | 12 | 8 | 3 | 3 |
| 420 | 17 | 12 | 10 | 6 | 3 | 3 |
| 600 | 14 | 6 | 5 | 4 | 3 | 2 |
| 640 | 5 | 3 | 2 | 1.5 | 2 | 1 |
| 800 | 5 | 1 | 1 | |||
| 860 | 2 | 0.5 | ||||
| Orientation | Horizontal | Vertical | ||||
|---|---|---|---|---|---|---|
| Speed | Acceleration (G) | |||||
| (mm/s) | 0.3 | 0.5 | 0.7 | 1 | 0.3 | 0.5 |
| 0 | 50 | 40 | 35 | 30 | 8 | 8 |
| 140 | 50 | 40 | 35 | 30 | 8 | 8 |
| 280 | 50 | 35 | 25 | 20 | 7 | 7 |
| 420 | 25 | 18 | 14 | 10 | 4.5 | 4 |
| 560 | 10 | 5 | 3 | 2 | 2 | 1 |
| 700 | 2 | |||||
| Orientation | Horizontal | Vertical | ||||
|---|---|---|---|---|---|---|
| Speed | Acceleration (G) | |||||
| (mm/s) | 0.3 | 0.5 | 0.7 | 1 | 0.3 | 0.5 |
| 0 | 60 | 50 | 45 | 40 | 18 | 18 |
| 70 | 60 | 50 | 45 | 40 | 18 | 18 |
| 140 | 60 | 50 | 45 | 40 | 16 | 12 |
| 210 | 60 | 40 | 31 | 26 | 10 | 9 |
| 280 | 34 | 20 | 15 | 11 | 5 | 4 |
| 350 | 12 | 4 | 1 | 2 | 1 | |
| Orientation | Horizontal | Vertical | ||||
|---|---|---|---|---|---|---|
| Speed | Acceleration (G) | |||||
| (mm/s) | 0.3 | 0.5 | 0.7 | 1 | 0.3 | 0.5 |
| 0 | 80 | 70 | 65 | 60 | 19 | 19 |
| 35 | 80 | 70 | 65 | 60 | 19 | 19 |
| 70 | 80 | 70 | 65 | 60 | 19 | 19 |
| 105 | 80 | 60 | 50 | 40 | 18 | 18 |
| 140 | 50 | 30 | 20 | 15 | 12 | 10 |
| 175 | 15 | 2 | ||||
Power saving setting enabled The unit of load capacity is kg. Empty column refers to inoperable motion.
| Orientation | Horizontal | Vertical | |
|---|---|---|---|
| Speed (mm/s) | Acceleration (G) | ||
| 0.3 | 0.7 | 0.3 | |
| 0 | 18 | 9.5 | 3 |
| 200 | 18 | 9.5 | 3 |
| 400 | 11 | 6 | 1.5 |
| 420 | 10 | 5 | |
| 600 | 1 | ||
| Orientation | Horizontal | Vertical | |
|---|---|---|---|
| Speed (mm/s) | Acceleration (G) | ||
| 0.3 | 0.7 | 0.3 | |
| 0 | 40 | 25 | 5 |
| 140 | 40 | 25 | 5 |
| 280 | 18 | 12 | 2 |
| 420 | 1.5 | 1 | |
| Orientation | Horizontal | Vertical | |
|---|---|---|---|
| Speed (mm/s) | Acceleration (G) | ||
| 0.3 | 0.7 | 0.3 | |
| 0 | 50 | 30 | 17.5 |
| 70 | 50 | 30 | 17.5 |
| 140 | 50 | 30 | 7 |
| 210 | 14 | 7 | 2 |
| Orientation | Horizontal | Vertical | |
|---|---|---|---|
| Speed (mm/s) | Acceleration (G) | ||
| 0.3 | 0.7 | 0.3 | |
| 0 | 55 | 50 | 19 |
| 35 | 55 | 50 | 19 |
| 70 | 55 | 50 | 13 |
| 105 | 30 | 15 | 2 |
Stroke and maximum speed
(Measured in mm/s)
| Lead (mm) | Energy saving setting | 50 - 300 (Every 50mm) |
|---|---|---|
| 24 | Invalid | 860＜640＞ |
| Valid | 600＜400＞ | |
| 16 | Invalid | 700＜560＞ |
| Valid | 420＜280＞ | |
| 8 | Invalid | 350 |
| Valid | 210 | |
| 4 | Invalid | 175 |
| Valid | 105 |
(Note) < > is applicable when operated vertically.
Correlation diagram of pressing force and current limiting value
Adaptive controller
(Note) EC series has their controller built-in themselves. See page 2-392 for details of the built-in controller.
Oversea specification
Important notes on selection
 | (1) The value shown for load capacity in "Main specification" refers to the maximum value. When enabling the power saving setting, the main specifications will change. For details, refer to "Payload table by speed/acceleration". (2) Horizontal load capacity shown assumes an operation running with an external guide. Detent mechanism may get damaged if a force was applied to the rod, except towards its moving direction. (3) Please refer to "Correlation diagram of pressing force and current limiting value" if you wish to have pressing motions to be carried out. Pressing force shown are their standard value. (4) It is necessary to limit the duty depending on the ambient temperature used. Refer to page 1-280 for further details. (5) The interface box is not dust-proof and drip-proof. Install it in a place where it will not be exposed to water. (6) Safety measures may be required depending on the attachment orientation. Refer to page 1-261 for further details. |
Dimension drawing
ST: Stroke
M.E.: Mechanical end
S.E.: Stroke end
*1 Actuator cable length can be changed to 5m as an option.
*2 The interface box relay section inside the broken line is not dust-proof and drip-proof.
*3 Select the actuator cable and power I/O cable so to have their total length 10m or less.
(Note) The rod moves to the M.E. upon returning to origin, so please take precaution that it may not interfere with anything while the returning process is running.
Dimension by stroke length
| Stroke | 50 | 100 | 150 | 200 | 250 | 300 | |
|---|---|---|---|---|---|---|---|
| L | Without brake | 361.5 | 411.5 | 461.5 | 511.5 | 561.5 | 611.5 |
| With brake | 411.5 | 461.5 | 511.5 | 561.5 | 611.5 | 661.5 | |
| A | 221.5 | 271.5 | 321.5 | 371.5 | 421.5 | 471.5 | |
| B | 104 | 154 | 204 | 254 | 304 | 354 | |
Mass by stroke length
| Stroke | 50 | 100 | 150 | 200 | 250 | 300 | |
|---|---|---|---|---|---|---|---|
| Mass (kg) | Without brake | 3.6 | 3.8 | 4.0 | 4.2 | 4.4 | 4.6 |
| With brake | 4.2 | 4.4 | 4.6 | 4.8 | 5.0 | 5.2 | |