LSA-S8SM

Product feature

Attachment orientation

Dimension drawing
Important notes on selection
Adaptive controller

Main specification

Specification 1

Heading			Contents
Horizontal	Load capacity	Maximum load capacity (kg)	5
	Speed/ Acceleration/Deceleration	Maximum speed (mm/s)	2500
		Rated acceleration/deceleration (G)	1
		Maximum acceleration/deceleration (G)	3
	Thrust	Rated thrust (N)	25
	Thrust	Max. thrust (N)	100
Stroke		Minimum stroke (mm)	60
		Maximum stroke (mm)	1440
		Stroke pitch (mm)	60

Specification 2

Heading	Contents
Drive system	Linear servo motor
Accuracy of Repeating Positioning.	±0.005mm
Lost motion	0.02mm and below
Base	Base: Aluminum, with white alumite treatment
Linear guide	Infinite linear circulation type
Allowable static moment value	－
	－
	－
Allowable dynamic moment value (Note1)	Ma：43N･m
	Mb：61N･m
	Mc：29N･m
Ambient operating temperature and humidity	0 - 40℃, Max 85% RH and below (No condensation shall occur)
Protection grade	IP20
Vibration resistant/Shock resistant	4.9m/s² 100Hz and below
Compatible to overseas standards	RoHS compliant
Motor type	AC servo motor
Encoder type	Incremental
Encoder pulse No.	1μm
Delivery	Written in [Reference for delivery] section of the homepage

(Note1) Values shown are for basic rated life of 10,000km. Life time travelling distance differs based on operating condition and attached condition.

　Please refer to page 1-342 for life time travelling distance.

Slider type moment direction

Stroke and maximum speed

(Measured in mm/s)

Stroke (mm)	60～1440 (60mm intervals)
Maximum speed (mm/s)	2500

Correlation Diagram of Acceleration and Load Capacity

The diagram shows the acceleration achieved at each load capacity, based on operation at a speed of 2500mm/s. Please use this information to select a suitable model which fulfils the desired carrying condition (work mass).

(Note) Take note that duty is not considered in the diagram.

Adaptive controller

The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.

Name	Max. connectable axis No.	Power source voltage	Control method															Maximum positioning points
			Positioner	Pulse train	Program	Network ※Select
			Positioner	Pulse train	Program	DV	CC	CIE	PR	CN	ML	ML3	EC	EP	PRT	SSN	ECM
SCON-CB/CGB	1	Single phase AC200V	●	●	－	●	●	●	●	●	●	●	●	●	●	－	－	512 (768 for network specification)
SCON-LC/LCG	1		－	－	●	●	●	－	●	●	●	－	●	●	●	－	－	512 (768 for network specification)
SSEL-CS	2		●	－	●	●	●	－	●	－	－	－	－	●	－	－	－	20000
XSEL-P/Q	6	Single phase AC200V Three-phase AC200V	－	－	●	●	●	－	●	－	－	－	－	●	－	－	－	20000

(Note) Please refer page 7-15 for network abbreviations such as DV and CC.

(Note) No connection is available for 5th and 6th axis of XSEL-P/Q.

(Note) Either 2 units of SCON, or a 2-axis controller is required to operate a multi slider.

Oversea specification

Important notes on selection

(1) In some cases where the strokes are too short, it may not be able to reach its maximum speed.
(2) Load capacity shown in the "Main specification" refers to their maximum load capacity. Load capacity differs based on operating condition. Please refer to "Correlation Diagram of Acceleration and Load Capacity" for further information.
(3) Kindly take note that the device doesn’t support vertical mounting.
(4) Safety measures may be required depending on the attachment orientation. Please refer to page 1-361 for further details.
(5) In any instance to set the cableveyor position in mirroring position, fix the main body upon rotating by 180° in horizontal direction for the main body is built in bilateral symmetry.
(6) Standard value for offset load lengths are 300mm and below, towards the direction of Ma, Mb and Mc.

Return to the page top

Dimension drawing

Horizontal specification (Standard)

ST: Stroke

M.E.: Mechanical end

(Note) While returning to home position, please ensure that there will be no interfering object for the slider moves to M.E. during the process.

(Note) No additional cables can be fixed into the standard cableveyor. Kindly use the cableveyor for user to fix additional cable.

Dimension by stroke length

Stroke	60	120	180	240	300	360	420	480	540	600	660	720	780	840	900	960	1020	1080	1140	1200	1260	1320	1380	1440
L	518	578	638	698	758	818	878	938	998	1058	1118	1178	1238	1298	1358	1418	1478	1538	1598	1658	1718	1778	1838	1898
B	482	542	602	662	722	782	842	902	962	1022	1082	1142	1202	1262	1322	1382	1442	1502	1562	1622	1682	1742	1802	1862
C	12	72	132	192	52	112	172	32	92	152	12	72	132	192	52	112	172	32	92	152	12	72	132	192
D	2	2	2	2	3	3	3	4	4	4	5	5	5	5	6	6	6	7	7	7	8	8	8	8
E	12	12	12	12	16	16	16	20	20	20	24	24	24	24	28	28	28	32	32	32	36	36	36	36
J	312	372	432	492	552	612	672	732	792	852	912	972	1032	1092	1152	1212	1272	1332	1392	1452	1512	1572	1632	1692

Mass by stroke length

Stroke	60	120	180	240	300	360	420	480	540	600	660	720	780	840	900	960	1020	1080	1140	1200	1260	1320	1380	1440
Mass (kg)	7.4	7.7	8.1	8.4	8.8	9.1	9.5	9.9	10.2	10.6	10.9	11.3	11.6	12.0	12.4	12.7	13.1	13.4	13.8	14.1	14.5	14.9	15.2	15.6

Laterally laid specification (Standard)