(Note) Photo above shows the motor reversing specification (Motor reversing on the left)(ML).
Actuator specification
Model | Motor output (W) | Lead (mm) | Maximum Load Capacity | Rated thrust (N) | Stroke (mm) | |
---|---|---|---|---|---|---|
Horizontal (kg) | Vertical (kg) | |||||
RCA2-TA5R-I-20-10-①-②-③-④ | 20 | 10 | 2 | 1 | 34 | 25 - 100 (In increments of 25mm) |
RCA2-TA5R-I-20-5-①-②-③-④ | 5 | 3.5 | 2 | 68 | ||
RCA2-TA5R-I-20-2.5-①-②-③-④ | 2.5 | 5 | 3 | 137 |
Symbol description ① Stroke ② Adaptive controller ③ Cable length ④ Option
Stroke lead | 25 - 100 (In increments of 25mm) |
---|---|
10 | 465<400> |
5 | 250 |
2.5 | 125 |
(Measured in mm/s)
(Note) The value within < > are applicable for those installed vertically.
Actuator specification
Heading | Contents |
---|---|
Drive system | Ball screw φ8mm, rolled C10 |
Accuracy of Repeating Positioning. | ±0.02mm |
Lost motion | 0.1mm and below |
Base | Base: Aluminum, with white alumite treatment |
Allowable static moment value | Ma:25.5N・m Mb:36.5N・m Mc:56.1N・m |
Allowable dynamic moment (Note2) | Ma:7.56N・m Mb:10.8N・m Mc:16.6N・m |
Ambient operating temperature and humidity | 0 - 40℃, 85% RH and below (Non-condensing) |
(Note2) Assumes a standard rated life of 5,000km. Life time travelling distance differs based on operating condition and attached condition.
Please refer to page 1-342 for life time travelling distance.
Adaptive controller
The actuators introduced in this page are controllable using the controllers shown below. Please select their type based on intended usage.
Name | Appearance | Max. connectable axis No. | Power source voltage | Control method | Maximum positioning points | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Positioner | Pulse train | Program | Network ※Select | ||||||||||||||||
DV | CC | CIE | PR | CN | ML | ML3 | EC | EP | PRT | SSN | ECM | ||||||||
ACON-CB/CGB | 1 | DC24V | ● ※Selectable | ● ※Selectable | - | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | - | - | 512 (768 for network specification) | |
ACON-CYB/PLB/POB | 1 | ● ※Selectable | ● ※Selectable | - | - | - | - | - | - | - | - | - | - | - | - | - | 64 | ||
ASEL-CS | 2 | ● | - | ● | ● | ● | - | ● | - | - | - | - | ● | - | - | - | 1500 | ||
MCON-C/CG | 8 | - | - | - | ● | ● | ● | ● | ● | - | ● | ● | ● | ● | ● | ● | 256 | ||
MCON-LC/LCG | 6 | - | - | ● | ● | ● | - | ● | ● | - | - | ● | ● | ● | - | - | 256 | ||
RCON | 16 | - | - | - | ● | ● | ● | ● | - | - | - | ● | ● | ● | - | - | 128 |
(Note) Please refer page 7-15 for network abbreviations such as DV and CC.
Oversea specification
Feature
Important notes on selection
(1) Take note that the maximum speed for horizontal use differs from of vertical use. (2) Load capacity assumes an acceleration of 0.3G (0.2G for lead 2.5 and vertical operation), which is its upper limit for acceleration. (3) Available duty depends on the operating condition (e.g.load mass, acceleration/deceleration). Refer page , 1-452 for further information. (4) Encoder type box for model item will be "I" for simple absolute as well. (5) Overhang load length has to be within the range of allowable dynamic moment. (6) Precaution is required depending on the attachment orientation. Please refer to page 1-361 for further details. |
Dimension drawing
ST: Stroke
ME: Mechanical end
SE: Stroke end
※1 Motor/encoder cable is an integrated cable. Refer page 1-255 for further information.
※2 Ensure the slider does not collide with other items, for it will return to ME after homing process.
(Note) Please take note that the motor unit of brake equipped 25 stroke specification extends out from the end of the table.
(Note) Standard offset position for the allowable moment is as of the TA5C (page 2-594, General Catalogue 2017)
Dimension/Mass by stroke
Stroke | 25 | 50 | 75 | 100 |
---|---|---|---|---|
L | 151 | 176 | 201 | 226 |
A | 103 | 128 | 153 | 178 |
B | 113 | 138 | 163 | 188 |
D | 103 | 128 | 153 | 178 |
E | 1 | 1 | 2 | 2 |
F | 43 | 68 | 43 | 68 |
G | 1 | 1 | 2 | 2 |
H | 4 | 4 | 6 | 6 |
J | 6 | 6 | 8 | 8 |
Mass (kg) | 1.4 | 1.6 | 1.7 | 1.9 |
(Note) There will be an additional mass of 0.3kg for specification with brake.